Please wait...

You selected inventions in category Clothing & Accessories

  • Power Walking ShoesPower Walking Shoes
      Preview
      Description

      A shoe involving a storage zone in the sole using molecular gyroscopes to store lots of energy fast plus lasers around the outside or base of the sole. A computer calculates how much sping in your step you want, or ect, and the laser multiplies the force exerted down. A high energy laser is used since light at high energy behaves like a heavy particle. The resonance of the wave is a standing wave (actualy a marathon perhaps!) so it has internal cohesion and doesn't radiate so much it wastes power. I envision a traction ray also using Van de Walls forces. The shoe exerts different leves of force and traction to match different loads and e.g. how much power is left in the battery, how much to climb hills, for fitness levels, ect. Another possibility is to use small oscillating gyroscopes from the molecular battery that send the centrifugal force in just one direction and so the same improvment. Walking is more active for millions, good for health...

      Charles Lawson, Inventor.

      Full details Contact close
    • COZY FOOTZ Shoe Heat SystemCOZY FOOTZ Shoe Heat System
        Preview
        Description

        A module that downloads heat to a dedicated boot or shoe that stores the heat safely to radiate inward (what else) the heat into the foot safely over hours. The insulation insures the heat radiates in more than out. There are battery heated boots but the step of charging the batteries is simple to put the shoe in the module for a faster charge of the COZY FOOTZ using gyroscopes to store the power much faster, or using the shoe itelf to store the heat instead of a battery. No need to take the shoe off in the cold to reload or wait hours to recharge, just put your feet down for a minute or two and you have cozy heat indoors or out for hours, great for outdoors! It's portable, fast and warm feet are not just a luxury, experts say cold feet are harmful to health. health.

        Charles Lawson, Inventor.

        Full details Contact close
      • Electroic Cooling JacketElectroic Cooling Jacket
          Preview
          Description

          I have developed a product named Electric Cooling Jacket and have applied for its patent. My UK patent application number is GB1322119.7 and applying for patent in other countries including USA, UAE, Brazil, Australia and others

          The product is a small jacket like dress/garment that can be worn alone or on a shirt/T-shirt or other wearing garment. It uses water evaporation method to keep the human body cool. It has a regular built for natural evaporation, while it also has a second and additional electronic layer for wearing with the jacket if more cooling is needed. This additional layer contains fans and other electronic equipments to start forced evaporation process, through the 2.5 to 3.5 inch small fans.

          It is good to use by people working in hot and arid regions of the world such as a NATO/US solder deployed in Saudi Arabian desserts or geologist exploring minerals or engineers working on oil rigs in open plans under the scorching sun or an ordinary person such as a salesman running shop to shop on his motorbike in open sun to sell or book the orders for his products, in an underdeveloped country such as Mexico, Brazil, Egypt, Pakistan, India etc.

          The suggested market price for retail sale without additional electronic layer is 50 to 100 USD that is easily bearable by a salesman who is wandering in the scorching sun.

          While the jacket price with an additional electronic layer for use by the troops in a dessert front, employers of multinational companies or sportsmen playing in the hot sun is 500 to 1000 USD which is also bearable for large organizations.

          I am a post graduate in the sciences from the University of Karachi which is one of top ranked universities of the world with more than 20,000 students. I am a person who is inventing new things from his childhood and won many prizes in science exhibitions during student life. Presently I am working as a professional marketer and a successful businessman and fully aware of the market potential of my invention. The market potential of this product is in billions of dollars. I understand well that I alone have no resources to market my product globally.

          I am interested in working with you in some way that we can introduce this product around the globe. You may directly the purchase manufacturing rights or get a manufacturing and selling lenience or do something other that is in your mind. If you are also interested in Electronic Cooling Jacket, kindly contact me in my email or call me on my cell numbers.

          Sample of product/ drawings/ brief business plan may be provided upon request and after signing a non-disclosure agreement.

          Syed Khalil Ullah
          Email:khalilsoc@gmail.com
          Cell # +92-307-2550250

          Full details Contact close
        • The Hanger Shoulder SimulatorThe Hanger Shoulder Simulator
            Preview
            Description

            Plastic parts that are affixed to the corners of ordinary plastic hangers mimicking the human shoulder, that prevent ugly hanger marks. They are lite weight and are affixed by a snap or magnetic latches, cheap to manufacture.

            Full details Contact close
          • Bio-functional clothing greatly helping eczema sufferersBio-functional clothing greatly helping eczema...
              Preview
              Description

              The skintoskin project was launched in collaboration with EU member states to explore alternate methods and natural substances, using knowledge and expertise from many sources in an effort to find new and effective treatments.

              The funding for the skintoskin® project came from the Portuguese government via O Novo Norte - North Portugal Regional Operational Programme 2007/2013. This is a financial instrument which supports regional development in the north of Portugal. It forms part of the National Strategic Reference Framework (NSRF) 2007/2013 for research and development.

              The technology and expertise used in skintoskin has been developed through collaboration with many centres of excellence.

              Universities
              Massachusetts Institute of Technology. (USA)
              Cambridge University material sciences. (UK)
              University of Minho. (Portugal)

              Medical institutions
              Hospital De Sao Marco Braga. Leading dermatologist Dr A. Sousa Basto. (Portugal)
              The National Health Service. (UK)
              Clinical evidence and medical studies
              Invivo and Invitro studies. Department of Dermatology, Friedrich-Schiller-University, Jena, (Germany)
              Clinical trial. JAS Farma® (Portugal)
              Clinical trial. Servico De Dermatologica e Venereologica Hospital De Sao Marco Braga Portugal.

              Private sector
              Smartfiber AG (Germany)
              New Textiles Lda (Portugal)
              Effjey Group Ltd (UK)

              Regulatory affairs and conformity/safety.
              Phagecon – Pharmaceutical Services and Consulting, Ltd. (Portugal).
              Infarmed Lda. EU Regulation Notification body (Europe)
              Regulatory Affairs department National Health Service (UK)
              Medicines and Healthcare products Regulatory Agency MHRA (UK)
              Okeo Tex (Standard 100) accreditation. (Europe)

              Skintoskin fabric is made from 3 naturally occurring ingredients,
              70% cotton, 20% Seaweed extract and 10% Silver ions.

              As our clothing and textiles in general are in contact with our skin on a daily basis there is no doubt textiles can have an adverse effect on chronic skin conditions. Applications to the skin tends to wear away or be removed by our clothing as well as our busy day to day lives and routines. This began a train of thought, if our clothing, the very thing we all have in direct contact with our skin on a daily basis could deliver therapeutic effects it would allow that effect to be in place for a far greater time, with excellent therapeutic effect and with great ease in our daily lives.

              The concept of Bio-functional clothing was born.

              Cotton was chosen as the basis for skintoskin as it is generally regarded as being one of the most tolerable fabrics when placed next to eczematous skin. Cotton is readily available; it is durable, renewable, natural and widely accepted. Cotton is also suited due to its structure to modern manufacturing techniques.

              Seaweed extract is already widely used in health organisations. The natural anti-inflammatory effects are well documented. Dressings and creams containing seaweed extract have given excellent results when used on burns victims for example giving good irritation relief and assisting in the healing process. The seaweed extract used in skintoskin is derived from Aschophyluum Nodosum seaweed.

              Why silver? Bacteria infection is a serious problem with a condition like eczema which can present with an open wound. The irritation caused by the condition leads to an itch scratch cycle with the sufferer causing further opening the skin. The infection level if needed can be controlled by the application of anti-biotic creams or oral anti-biotic dosing. Silver is fast acting and highly effective against Gram + and Gram – bacteria, as well as for several fungal infections, especially those of the Candida strain,

              Full details Contact close
            • MUSICAL SNEAKERSMUSICAL SNEAKERS
                Preview
                Description

                Musical Sneakers are sneakers that have a chip located in the heal that's the size of a dime, and is programmed with PBS Children's Television Programming: Barney & Friends, Sesame Street, Dora The Explorer, Gala Gala Island, and a variety of Classical Music. The sneaker is 3 1/2 inches in length, the insole has a rubbery cushion for shock exsorbancy, the sole is 1 inch, and the slot is 1 inch, the botton that's pressed for music to play is 3cm. Eventually I want to have other chips programmed with Broadway Show Tunes, Jazz, Rock n Roll, Hip-Hop etc.

                Full details Contact close
              • A DEVICE AND METHOD FOR ALTERING THE SHAPE OF STRING CABLE CORD OR  SIMILAR MATERIALA DEVICE AND METHOD FOR ALTERING THE SHAPE OF...
                  Preview
                  Description

                  Headphones have become ubiquitous within the modern world; and for good reason, people love their music. Understandably, people hate when something comes between them and their music. Unfortunately, headphones often become a vexing obstacle between the user and their music. Anybody who uses headphones will tell you that one of the most aggravating situations is when their all set to listen to their music, they get their media device out only to find the cables in a tangled mess.
                  Although untangling the headphones only takes a few minutes this is an inconvenience the user would rather not deal with. Enthusiasts and headphone producers have long recognized the problems associated with tangled cables, spending millions of dollars in research and development. Unfortunately, the result of this research has created subpar products that are either too inconvenient to use or are ineffective at improving the users experience. It has been proven many times that users are unhappy with the current headphones design and their poor tangle resistance. Moreover, there is a proven market for solutions. For example, one of many market proven products includes the Kickstarter Project CordCruncher, the project raised over $66,000 in just 30 days (http://www.kickstarter.com/projects/1587181400/cordcruncher-earbud-headphones). There are many other Kickstarter Projects that have raised over $600,000 for cable solutions.
                  Our solution has the same functionality as the Cord Cruncher Headphones, and more. The product would be cheaper, more versatile, and convenient to use; solving the annoying problems associated with tangled, damaged, strained, or knotted headphone cables while opening up possibilities for more creative uses of headphones. The solutions functions by using a special wire integrated into the headphone cable, the wire is commonly known as memory metal and has riveting properties. The memory metal allows the user to use the headphones, as they normally would, however in order to conveniently wrap the cables up for storage the user may press a button that causes the memory metal to return to a predefined shape. Useful predefined shapes may be a tidy coil, compact winding that contours to an electronic device, or even an Apple Logo! The possible shapes, sizes, and configurations are endless; any shape that cables can be wound into can be achieved automatically by using integrated memory metal. Custom designs may include the user name, a word, or customer design.

                  Full details Contact close
                • PatentGeschmacksmuster von 4niedlichen Kinderfigurenweltweit einzigartigPatentGeschmacksmuster von 4niedlichen...
                    Preview
                    Description

                    Guten Tag,
                    Verkaufe mein eingetragenes und genemigtes Patent/Geschmacksmuster MS-Sterni1
                    Hierbei handelt es sich um 4sehr niedliche Kinderfiguren mit eigenen Charakter.Die Figuren sehen sehr schoen auf Baby-und Kinderkleidung aus,natuerlich auch auf alles was Babys und Kinder so brauchen.Die Figuren wurden auf Baby-und Kinderkleidung auch schon auf Messen in Deutschland praesentiert und sind in Deutschland bekannt
                    Sterni- der mit seinen bezaubernden laecheln alle Kinderherzen hoeher schlaegen laest
                    Minu- die immer freundlich mit ihrer Blume wingt
                    Wolfi- der kleine schlaue ,der immer eine kleine Geschichte zu erzaehlen weiß
                    Zottel- das ist der kleine Frechdachs
                    Die Figuren sind weltweit einzigartig und besitzen daher ein sehr großes Potenzial
                    Machen Sie mir ein Angebot fuer das Patent/Geschmacksmuster
                    erreichbar unter:491744210680 oder manuela_stein@t-online.de

                    Full details Contact close