Please wait...

You selected inventions in category Clothing & Accessories

  • track vesttrack vest
      Preview
      Description

      THIS IS A NEW AND IMPROVED VEST FOR CONSTRUCTION WORKERS,PARAMEDICS,FISHERMEN,FAMILY AND KIDS,ETC.THE TRACKVEST IS GOOD FOR SAFETY AND CONVENIENCE WITH MULTIPLE POCKETS AND COLORS FOR YOUR CONVENIENCE.

      Full details Contact close
    • ECO DryerECO Dryer
        Preview
        Description

        The ECO Dryer is an professional application to use in the house keeping for drying clothes always outside even by snow, rain and cold weather.
        Bugs, dust, rain protected. VERY Easy to use.
        VERY CHEAP drying clothes always fresh and outside.
        Very compact application.

        Full details Contact close
      • Snooze HoodieSnooze Hoodie
          Preview
          Description

          A hoodie/sweater with small compartments at the sensitive parts of the back and behind the head (the hood) which is filled with pillows, foam, or gas bubbles, so you can lay down anywhere and start sleeping. Also, it can have motors and a battery compartment if you want a massaging experience.

          Full details Contact close
        • Personal Care DevicePersonal Care Device
            Preview
            Description

            The Gota’ Go Personal Care Device is a concealed, catheterlike device to accommodate, permit, and retain male urination in situations where a bathroom break is not possible or desirable. The design intent is that the Gota’ Go Personal Care Device would have wide application in situations ranging from male incontinence to law enforcement to long-haul trucking.

            Full details Contact close
          • ODSTM-1 in-situ dyne surface tension wettability measurement at fast moving plastic films and foilsODSTM-1 in-situ dyne surface tension wettability...
              Preview
              Description

              Method and device for online tough less surface tension control ODSTM-1 in DE19543289 by which the fast moving substrate through the measuring gap. It is transmitted with a chromatic beam and spectral selected light source were two optical channels are displaced and polarized by 90 degree to each other. Both optical axles are precise and motor driven shift able in certain angles from 25 up to 65 degree. The spectral light photons, transmission, extinction, absorption grades are detectable by two optical CCD imagine vision devices, integrated into the sensor case on other side of the substrate.

              Material condition
              At high speed moving substrates means plastic foil, flexible, film, laminate, coating, bonding, labeling, co-extrusion, BOPP, LDPE, LLDPE, HDPE, MDPE, MAS, MOH, MEV, PET, FEP, PP, PE, PS, PO, EVA, PTFE, PVC, PTFE, Vinyl, Polyester, wrapping, self-adhesive tape, high strength, cross laminated, adhesive coated films, reflective or magnetic sheeting, automotive tape products, inkjet, heat sealing, security, pressure sensitive tapes for entertainment or building industry, masking or printable plastic films, polycarbonate, acrylic, extruded or polished cellulose, optical grade polycarbonate, sheets for IR or laser protection, filter sheet, imaging, capacitors, bi-oriented polystyrene sheet, multilayer co-extruded film, PVC, PETG, polyimide, tear tapes for aerospace, inner covering in aircrafts, automotive, medical, bioengineering, renewable, agriculture, marine, household, commercial, domestic, construction, high-porous membranes for uses in alkaline lithium ion batteries, fuel cells, filtration equipment. By gauges 10-500 microns, fabric widths up to 10000 mm and web speeds up to 18 m/s.

              Optical properties and quality control
              Material specific wavelength selection 1200 up to 1800 nm, material specific finger prints, molecular spectral properties, transmission, optical angle scanning, ultra low level stray scatter light detection, polarization, slot diaphragms, transverse displacements control the light beams along and far from the optical X and Y axes. The results are extreme scattering, diffraction, NIR, IR, stray light photons generation into the layer areas at both sides of the moving substrate.

              Their reflected and transmitted light intensities enables the determination by defined formulas and data matrixes the surface tension values in ranges from 28 up to 62 mN/m or dynes which are direct associate and bond to real static values for statistical quality control (SQC).

              And this entirely independent of the material specific influences as like surface consistency, thickness, density, weight, opacity, coherence, filling, stretching, shrinkage, structure, co-extrusion, polar grouping, temperature, intrinsic motivation or viscosity, hydrophobia, hydrophilic molecules, hydrogen, moisture, water steam proof, bi-layer, polymer, patterning, nanostructure, irradiation, isotopic, catalyst, coherence, absorption, photo mask effect, radiation, resonance bands, Raman, electron spectroscopy for chemical analysis ASTM or ATR method, property, acoustic photonic liquid effects, pre material treatment as corona, plasma jet, flam treatment.

              Full details Contact close
            • Antimicrobial credit cards identification cards membership cards and identification badges and badge holdersAntimicrobial credit cards identification cards...
                Preview
                Description

                Invention involves embedding antimicrobial disinfectant in commonly used plastic cards-- driver's licenses, identification cards, ATM cards and credit cards -- to reduce transmission of bacteria when the card touches human hands and other surfaces.

                Full details Contact close
              • Quick and easy-to-use rain protection for Golf bagsQuick and easy-to-use rain protection for Golf...
                  Preview
                  Description

                  This invention is a rain cover for golf bags that can be transported on a trolley. In case of sudden rain, the cover can be quickly and easily pulled over the gold bag, thus keeping the golf clubs dry.

                  Problem:
                  If one doesn't have a golf car, his/her golf clubs are not protected from sudden outbursts of rain.

                  Solution:
                  This inventive concept solves this problem with a rain cover fitted on the golf bag that is quick and easy to use, thus keeping golf clubs dry.

                  Full details Contact close
                • SWIMSUITESSWIMSUITES
                    Preview
                    Description

                    Swim Suites is a new-patented invention for hanging wet swimsuits.
                    The Product is made of Plexiglas (acrylic); it is two fold as to add a poster, information and or advertising (eg: Hotels, Cruise ships etc.). At the bottom is a trough with a sponge to catch dripping water from suit; the water will evaporate thus no maintenance. It has three hooks to hang suits on (eg: one mans suit & top & bottom of a bikini).
                    The main selling points to a hotel are 1) no water damage to carpet in room 2). Supply information about hotel (eg; check out times, room service menu, map of hotel, emergency exits etc.) 3). Sell advertising to local merchants, & things to do in the city. 4). Most important adding a touch of class to the room.
                    Selling points for home use are 1). Not taking a shower with your suit hanging with you. 2). Having a place for the kids to put their suits instead of on the floor. 3). Interchangeable posters (kids room pokemon – Parents room nice sunset or wallpaper to match their décor).

                    Full details Contact close