Please wait...

You selected inventions in category Construction

  • Construction using conical brickConstruction using conical brick
      Preview
      Description

      Construction using conical brick this is a new method help to improve building methods using brick units that would increase shear stress more than the currently bricks and reduce the construction cost, time and effort.
      Is done by designing the 8 heads cone shaped in the brick surface with specified dimensions.
      It is look like the tree. The tree proving itself through its roots.
      Settles heads in the cylindrical void located in the lower brick to serve as land for the tree.
      The head like conical shape and the voids like cylindrical shape fill the void between the surface of the cone and cylinder using welding material (cement mortar).
      the right side of the brick containing a void and the other side of brick containing salience
      with the same distance in the right side and that mean more strong correlation between units of brick.
      For easy spill cement in the cylindrical voids the model is designed to meet this purpose it is a body contains the same diameter circular that be found in the bricks and with the same distances, which would easily allow the passage of cement bricks in the voids and saving more cement time construction and ease of implementation. waste

      Full details Contact close
    • Continuous flexible process control via 3D surface and geometry measurements in productionContinuous flexible process control via 3D...
        Preview
        Description

        A new development for Surface & Geometric Dimensioning and Tolerancing (GDT) measurements;
        Current instruments widely in use are Coordinate Measurement Machines (CMM) which are very time consuming, e.g. time for a car door measurement may take up between 6 to 8 Hrs.;
        Our equipment will do the same measurement for the same object in less than 20 seconds;
        We have reached production practice. All future changes are mainly Software related only, e.g. “tweaking measurement time”.

        The market, Aero, Military, Automotive etc. needs Equipment which will Measure accurately from the smallest part to the largest panel continuously in a assembly line, e.g. CMM’s cannot provide this;
        Our Scanning Equipment can be integrated in a manufacturing line and measure parts faster and more economical than machines in use.
        This will save on expenditures, increase overall Product Quality and Profits

        The technology is a powerful system using building blocks and a new technology based on a photogrammetric approach to recover three-dimensional information.
        The Scanner is using „Building Blocks“. It is possible to serialize or parallelize several single scanner into one sizeable scanner matrix which allows for large surfaces to be measured.
        Therefore the measurement and analysis of large point clouds towards measurement results against CAD data will be much faster and more accurate.

        Full details Contact close
      • Coupling device for assembly of panels or frames eg. furniture, box elements, etcCoupling device for assembly of panels or frames...
          Preview
          Description

          A coupling device comprising male and female corresponding parts, which can be activated by thumb or finger press, and which remains flush with the panel or frame surface. The coupling device can remain lodged within the panel or frame even when the latter are disassembled, which avoids having to worry about losing the coupling device during transport and will not stick out beyond the surface of the panel or frame. Ideal for mounting furniture elements sold as kits, such as cupboards, shelves, wardrobes, etc, but can also be used to assemble frameworks. The system is designed so that the coupling device can be locked and unlocked by simply pressing on a part of the coupling device with the thumb or any finger capable of exerting a push action. The coupling device can be made of metal or any suitable plastic material or a combination thereof.

          Full details Contact close
        • CPPPV Flaying cars technologyCPPPV Flaying cars technology
            Preview
            Description

            Centripetal process of production propulsion the vehicles ,tehnology flaying cars.

            Production facility transporta present invention to repeal c known limitations in terms of mobility and payload transpo conditioned vehicles on atmo physical, chemical changes in media where that is where th located.

            This invention relates to a ne production plant transportati takes place at the centripetal i motors. Developed a progra centripetal process of produc transportations.

            Centripetal process manufacturing facility transportations the centripetal inertia motors by the present inventio includes a program centripetal course the manufacturing process by which plants transportations along a propeller-retarder that rotates with constant angular velocity in the xy axis rotation,which point is located in the middle of its length,within a housing oslonjenoj centripetal inertia motor.

            Drive transportations is produced by o or more of these mutually synchronize propeller-retarder with these permanently embedded sample of m.1 according to that consequently,the calculated optimal program unfolding.

            Each individual program unfolding centripetal process production facility transportations each centripetal inerti motor,individually calculated and cycli rescheduling depending on the size of the mass m.2. transportations,and th required size of its acceleration in the direction of the production facility transportations.

            In today's state of the art there is no solution of one of the most important technical issues the normal production process, transport vehicles drive at normal inertia motors.

            Economic and financial information

            Weight permanently embedded versus mass m1 m2 vehicle, up to 1:1600

            Necessary small angular rotation speed propellers,and 22 rad / sec.

            Low technological requirements,it is not necessary the development of new technologies.

            Very fast and cheap development and new types centriprtalnih inertion engine.

            There is no competition!

            Only. technology i state of the art

            Full details Contact close
          • CRAMP IRON FOR THE FIXATION OF FORMWORK FOR CONCRETE SUPPORTSCRAMP IRON FOR THE FIXATION OF FORMWORK FOR...
              Preview
              Description

              The invention relates to a cramp iron for the fixation of formwork for concrete supports. The cramp iron comprises four profiles in the form of rectangular pipes (1 to 4) that can be connected to each other to form a frame, of which at least two comprise first and second pipe sections (such as 1a, 1b), which can be inserted into each other in a telescoping manner and displaced relative to each other. The pipe sections (such as 1a, 1b) are provided with borings (5), which are equipped to receive securing elements (6).

              Full details Contact close
            • Device for leveling the tiles Device for leveling the tiles
                Preview
                Description

                When laying tiles on a surface veneering necessary that between the tiles are identical seams and the tiles have to be aligned in the same plane.

                To do this, there are now many different devices. But when a small amount of tiling work, it makes no sense to buy an expensive device.

                One of the cheapest and most commonly purchased devices are crosses. But they only help you align the seams between the tiles. And thus there is no inexpensive devices to align the tile in the plane. Therefore, in order to align the tiles in the plane or need to buy expensive devices or to have a great experience. The main difficulty in the process of laying tiles is to create on its surface and a uniform force required to tile is flat relative to other tiles.

                When the tile is placed on an unprepared surface, there should have experience or expensive device. But now, with a large number of different building materials, tile is often placed on the already prepared surface (for example on plasterboard).

                Offered below device used to align the tiles in the plane when it is placed on the prepared surface.

                The offered device represents equal plastic balls of identical diameter. Such balls can be sold in construction shops together with plastic crosses. Crosses are used to align the tile joints, and the balls be used to align the plates in a plane.

                Currently, the device is applied for patent of the Russian Federation (№ 2014101153).

                There is an opportunity for the international patenting (till January 2015).

                More detailed information can be see: http://tfinb.com/250.htm

                Full details Contact close
              • Device for leveling the tilesDevice for leveling the tiles
                  Preview
                  Description

                  When laying tiles on a surface veneering necessary that between the tiles are identical seams and the tiles have to be aligned in the same plane.

                  To do this, there are now many different devices. But when a small amount of tiling work, it makes no sense to buy an expensive device.

                  The present apparatus has the following advantages:
                  1. The device is easy to use and does not require additional equipment;
                  2. Is only a small one-time supporting disk 9;
                  3. On the supporting disk 9 can be the ribs which will define the thickness of the seams between the tiles.

                  The patent of the Russian Federation for a utility model (№146122).

                  Also filed an application for an invention in the Russian Federation (№2014122385).

                  There is an opportunity for the international patenting (till June 2015).

                  More detailed information can be see: http://tfinb.com/251.htm

                  Full details Contact close
                • Device for leveling the tiles Device for leveling the tiles
                    Preview
                    Description

                    When laying tiles on a surface veneering necessary that between the tiles are identical seams and the tiles have to be aligned in the same plane.

                    To do this, there are now many different devices. But when a small amount of tiling work, it makes no sense to buy an expensive device.

                    The present device has the following advantages:

                    1. The device is easy to use and does not require additional equipment;
                    2. The device has a simple structure and a low manufacturing cost;
                    3. Consumable parts is the small supporting disk (2);
                    4. On the supporting disk (2) can be the ribs which will define the thickness of the seams between the tiles.

                    At the moment, pending utility model in the Russian Federation (№2015101627).

                    Also filed an pending for an invention in the Russian Federation (№2015101622).

                    There is an opportunity for the international patenting (till January 2016).

                    More detailed information can be see: http://tfinb.com/259.htm

                    Full details Contact close