Please wait...

You selected inventions in category Construction

  • easy stoneeasy stone

      Dear Sirs, this is my invention-patent.

      My patent:
      easy stone: innovative application of stones and not only in the industrial sectors of small and medium-large. (Construction-as skyscrapers, auto) mounting system single world.
      Simple, fast, effective, long-lasting, lightweight no maintenance,
      For you interested and for more information please do not hesitate to contact me;
      are at your disposal for any need and need and I am happy to meet you for a successful future and success.

      Full details Contact close


        So far we have been familiar with different solutions of vehicles that have classic drive unit by fossil fuels, hybrid vehicles and purely electric vehicles.
        Our product is an electric vehicle, which connects to powered vehicle and by its motor power starts composition made of these two types of vehicles.
        To a classic vehicle, it provides abilities such as

        1) drive unit on electricity
        Significantly lower electrical energy price comparing the price of fossil fuels even up to 75%. This price is even lower if the consumer has its own electrical energy producer

        2) Carbon monoxide emission amounts 0%, the vehicle does not produce neither exhaust gases nor any other detrimental products.

        3) Level of noise is lower per 90% comparing vehicles with classic drive units.

        4) Vibrations made due to engine operations are also lower as comparing the piston engine it works with less motion of movable parts and less friction.

        5) Energy utilization of energy consumed is up to 90%. Energy consumed that motor converts into mechanical energy has high degree of utilization comparing the engine with internal combustion, which high percentage of energy made by derivatives combustion – thermal expansive energy, releases without the possibility to use it and that energy efficiency level in fossil fuel vehicles is maximum up to 35%.

        6) Vehicle has two driving axles that can work at the same time or by turning on only one of them at the time getting this way characteristic of vehicle for off-road driving.

        7) Vehicle can easily be connected with mechanical connection with other types of vehicles such as semi-trailer achieving its compatibility - same drive unit for different means of transportation.

        8) Vehicle provides higher vitality in traffic to a consumer as it has two separate drive units.

        9) Vehicle provides additional trunk solving the problem of lack of conveying space in case of vehicles with small trunks.

        10) Greater maneuverability of vehicle when having difficulty with parking and traffic jams, as the wheels are steered by direction

        11) Better distribution of masses as external electromotive drive unit gives the role of stabilizer by its mass and prevents skidding by direction in case of sharp maneuvers.

        12) Greater passive security of passengers in case of blow from the backside of vehicle, as in this case electromotive drive unit has the role of amortization area, which will receive greater part of blow energy.

        13) Vehicle has the ability to produce electric energy and supply external consumers when it is in parking position.

        14) Additional self-charging of batteries by solar photovoltaic cells when it is in parking position that can be blinds like pulled out and cover the roof of the trunk of motor vehicle and upper surface of powered vehicle, making batteries self-charging and giving the vehicle protection from strong sun or other atmosphere changes that can damage the car.

        15) Three working modes:

         Electro mod when the vehicle is moved by power of electromotor, which is supplied by electric energy from battery cells.

         Hybrid mod, when electromotor of motor vehicle and motor of powered vehicle work together, vehicle in this situation has sum of power of these two motors, and also in this mod self-charging of batteries of motor vehicle over the electricity generator is realized.

         Mod when powered vehicle starts its own engine on fossil fuels and the engine of motor vehicle is not active; this the situation battery cells are also self-charging by electricity generator, which is placed in the last vehicle on the picture.

        16) Easy access to the components of vehicle in case of service or repair.

        17) The possibility for vehicle theft is difficult as beside the regular barriers against theft it is necessary to decode control interface from the back motor vehicle.

        Full details Contact close
      • Solar plant for the production of electrical and thermal energySolar plant for the production of electrical and...

          The invention is a combination respectively a hybrid collector in which through concentration and the cleavage of the sunlight the waves in a length of 1000nm get concentrated and cooled on the solar cell. The thermal energy is recovered by another heat dissipating circuit.

          Photovoltaic systems and solar thermal systems have various modes. The operating principle of photovoltaic systems is based on the heating of semiconductor cells, which convert sunlight into electricity. The disadvantage here is that the efficiency on the basis of semiconductor cells heating can be reduced by up to 30%.
          Thermal solar systems, on the other hand, take advantage of the warmth of the sunlight. But the problem with solar thermal systems is that they disregard the "electric part” of the solar radiation.

          The invented solar plant combines the operation of photovoltaic and thermal solar systems. The combination respectively the hybrid collector thus enables greater energy efficiency, as both the "electric" and the "thermal" part can be converted.

          Full details Contact close
        • track vesttrack vest


            Full details Contact close
          • New sources of energyNew sources of energy

              new energy sources.
              Use gravity (gravity), geothermal effect (warm ground), solar energy, power flows of rivers, the wind.
              Maximum security.
              For the staff, (for maintenance), environment (ecology), for the state (strategic security).
              High efficiency. High power (from 1KVt to 1000 MVt and more). Universal application.
              The minimum cost price of electricity.

              1 - power converter steam (air), low pressure. Patent RF 2215183.
              When small amounts has enormous potential power. No competition. Able to replace nuclear
              power, hydropower, thermal power plants.

              2 - inverter air flow (of water). Patent RF 2219369.
              more efficient than traditional turbines. When used in water can replace the hydroelectric power station.

              3 - know-how. Super battery. The new principle of accumulation of electricity.
              Able to replace hundreds of conventional batteries

              Full details Contact close
            • Coupling device for assembly of panels or frames eg. furniture, box elements, etcCoupling device for assembly of panels or frames...

                A coupling device comprising male and female corresponding parts, which can be activated by thumb or finger press, and which remains flush with the panel or frame surface. The coupling device can remain lodged within the panel or frame even when the latter are disassembled, which avoids having to worry about losing the coupling device during transport and will not stick out beyond the surface of the panel or frame. Ideal for mounting furniture elements sold as kits, such as cupboards, shelves, wardrobes, etc, but can also be used to assemble frameworks. The system is designed so that the coupling device can be locked and unlocked by simply pressing on a part of the coupling device with the thumb or any finger capable of exerting a push action. The coupling device can be made of metal or any suitable plastic material or a combination thereof.

                Full details Contact close

                  This device was designed to apply liquids and gels in a controlled manner. It has an unlimited use concerning many products in the beauty & medical fields. (patent # 7179008) uspto website

                  Full details Contact close
                • MAC-modular aerocarMAC-modular aerocar

                    What my product idea is?

                    My product is the modular vehicle for land and air transport of cargo and passengers. It is a product of a simple and technically feasible way, given the successful combination of car and aircraft.
                    It consists of modules tug aircraft to drive the mode of land transport and aircraft type gyrocopter. It is designed as an inexpensive and reliable means of transportation, which solves the problem that exists with the helicopter in terms of short to medium radius of operational use, high cost per hour of use, complexity of maintaining the primary circuit, the constant lack of qualified crews and teams to operate and maintain sophisticated models of helicopters.
                    My concept is to offer to the market an efficient means of transportation, which is a blend of the latest aviation and automotive technology works harmoniously with a combination of general satisfaction. In relation to the projects and models that belong to the previous state of the art, in our project are applied simple solutions that guarantee reliability and economic viability of using both in terms of vehicle production and in terms of cost-effectiveness of use for users.
                    Market demands that we fully understood and the availability of the latest technologies that are reliable and cheap assure us that we are pioneers in realizing someone's dream of a personal car/aircraft that will be accessible to a wide range of users.

                    The advantages of this method of transport

                    Complete comfort on the road without disturbing the flight characteristics of aircraft,
                    which would resulting installation of integrated circuit for driving on roads in the aircraft.
                    The ability of transport, cargo, depending on the task. The use of auto gasoline, which is more accessible and cheaper in the field. Putting in the hangar of the vehicle is not required at the airport, reducing operating costs.

                    Potential users of such vehicles are:
                    • Military and police units
                    • Firefighting units
                    • Electric Power Companies
                    • Services for the rapid transport of postal items
                    • Private customers and many others

                    The product belongs to the field of aeronautics and road traffic. I appreciate that my ideas, MAC, (modular aerocar), is a new step towards the conquest of markets that future personal land/air transport.

                    Which business sector my idea falls into

                    The idea belongs to the transport and tourism.

                    What stage of development my project has reached

                    The project is under development ideas. Defined requirements and shape of vehicles, as well as the selection of available technologies, needed to obtain the final product.

                    What is my involvement, what role I would like to maintain?

                    Participation in the project, the site coordinator in charge of the technical sector of product.

                    How I see your interest into this project?

                    As the financial sponsor/partner/mentor or in another role, in line with mutual interests.

                    What our potential revenues and profits I see in year 3

                    We get an exclusive opportunity to become a world leader in conquering the market, in relation to new technology and features personal air and road transport, as well as the opportunity that many dream into reality, in relation to mobility, convenience, speed, security, mobility and so on in performing daily tasks, special assignments, recreation, adventure and many other areas where people are engaged, and at a much cheaper and safer method and compared to all previous known solutions.

                    The next step is the development of industrial design and technical documentation, owever as the product is not technically demanding, there are not require significant resources for the production thereof.

                    Upon implementation of this step I will be able to make available to the investor detailed product characteristics. From investors or partners is expected the necessary funding to implement the above steps.

                    Full details Contact close