Please wait...

You selected inventions in category Design

  • Energy-Efficient Chain-Drive Sprocket Reciprocating PumpEnergy-Efficient Chain-Drive Sprocket...

      National Patents: 201120047489.x;201120145598.5
      This type of reciprocating pump uses sprocket-and-chain structure to drive piston, which removes the limitation of crank-connecting mechanism. On the one hand, the motion of piston is constant and consumes low energy. On the other hand, the piston stroke is long and the relevant valves switch unfrequently, so valves' service lives are long. Besides, it's easy to upsize.
      Compared with the existing pumps, an energy-efficient chain-drive sprocket reciprocating pump has high efficiency, high head, large flow and strong adaptability to adjust flow and head at will. The output power automatically adjusts with different working conditions, and the energy-saving effect is remarkable. It is anti-corrosive and anti-abrasive with long service life.
      The spcifications are classified by output power (flow×head) and maximum head. Within the allowed maximum head, flow and head can be adjusted freely and continuously. So its spcifications are largely reduced, and each specification might cover a dozen or even dozens of specifications of impeller pump. Abviously, its production and use become more convenient.
      The Application and Derivatives of the energy-efficient chain-drive sprocket reciprocating pump:
      a. High-lift pump
      It can product high-head pump to make up for the low-head impeller pump. It can be used in various industries. Some representative high-head pumps are:
      Waterflood pump and slurry pump in oil industry; deep mine drainage pump in coal industry; lift pump in large irrigation and drainage pumping station, etc.
      b. Chemical pump
      As the impeller pump has poor anti-corrosion quality, the service life of a chemical pump is short. At present, the market is crying out for chemical pump with large flow, high head, and long service life.
      The anti-corrosion materials like stainless steel can be used to produce chain-drive sprocket reciprocating pump, or do perservative treatment to produce chemical pump for transporting all kinds of corrosive mediums. It has a huge market.
      c. Other derivatives
      Based on the above advantages of reciprocating pump, the following derivatives can be produced:
      Secondary water-supply system in high buildings; minipumper; the ship drive system; high pressure gas-compressor.

      Full details Contact close
    • Imploturbocompressor -  Coming from Macro-Flow to Micro-Flow by Implossion - Excellence in Design 1 Moving Part System - 1 Compression StepImploturbocompressor - Coming from Macro-Flow to...


        Coming from Macro-Flow to Micro-Flow by Implossion.

        *-“Excellence in Design" because is only one moving part. Only one unique compression step. In flow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

        Presenting one of the many diferents examples, could specifically be this same invention applied in pair in every bar end, similar to what would be a turbine reaction or turbocompressor, and making the best profit of a exhaust gas dynamic flow, compressing a new air entrance and therefore falling into the technical field of the reaction turbines. This of course, considerating materials that are resistant to the high temperatures such as the ceramics ones. And furthermore this invention approaches more the combustion point and therefore also more to the gases expansion point, in order to search a higher expanding dynamic strength. It could, for example, be presented into an inter dynamic rotor system ("Gear Turbine"aplication), supported internally and in a rotating system. And likewise being able to activate a new concept of dynamic turbine by pushing gearing, and likewise, creating a new technical field.
        Or can be in a more simple way by means of the system of this same invention applied to the bar end, but without a movement of interaction with the rotor, only the rotary dynamics in a static point for any type of mechanical work such as a dynamo in order to generate electricity through the dynamic strength of a flow when it is rotating at the moment it receives it, just like a pelton well do.

        And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the flow trajectory.

        In case the flow that is received is a water falling by gravity, and a dynamo is placed on the rotary bar, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before.

        Or only receive the liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the diference of can have an horizontal position, and have wind from all the sides and all the time. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

        Connecting the free end of the bar of this invention to a power plant (manual, electrical, mechanical, or combusting, etc...), there will be available a capacity and a position in order to generate the flow dynamics (or even better, a propulsion). This applied? to gas flows (air) or to liquid flow (water). This of course, considering the due rotating directions as well as the inclination, wings, curvature and the due dimensioning for every application of every technical field.

        ?With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the autoprolpusion of an aircraft. Being an effective and very simple s

        Full details Contact close
      • State of the Art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT - Atypical Motor Engine TypeState of the Art / Novel Rotary-Turbo-InFlow Tech...


          Atypical InFlow Thermodynamic

          Technology Proposal Submission

          Novel Fueled Motor Engine Type


*State of the art Innovative concept Top system Higher efficient percent. 
Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.


YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

          -This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

          *8-X/Y Thermodynamic CYCLE - Way Steps:

          1)1-Compression / bigger

          2)2-Turbo 1 cold

          3)2-Turbo 2 cold

          4)2-Combustion - circular motion flames / opposites

          5)2-Thrust - single turbo & planetary gears / ying yang
6)2-Turbo 2 hot

          7)2-Turbo 1 hot

          8)1-Turbine / bigger


-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.


-Non waste parasitic looses for; friction, cooling, lubrication & combustion. 

          -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass.


-Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept. -Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.

          Full details Contact close
        • Electroic Cooling JacketElectroic Cooling Jacket

            I have developed a product named Electric Cooling Jacket and have applied for its patent. My UK patent application number is GB1322119.7 and applying for patent in other countries including USA, UAE, Brazil, Australia and others

            The product is a small jacket like dress/garment that can be worn alone or on a shirt/T-shirt or other wearing garment. It uses water evaporation method to keep the human body cool. It has a regular built for natural evaporation, while it also has a second and additional electronic layer for wearing with the jacket if more cooling is needed. This additional layer contains fans and other electronic equipments to start forced evaporation process, through the 2.5 to 3.5 inch small fans.

            It is good to use by people working in hot and arid regions of the world such as a NATO/US solder deployed in Saudi Arabian desserts or geologist exploring minerals or engineers working on oil rigs in open plans under the scorching sun or an ordinary person such as a salesman running shop to shop on his motorbike in open sun to sell or book the orders for his products, in an underdeveloped country such as Mexico, Brazil, Egypt, Pakistan, India etc.

            The suggested market price for retail sale without additional electronic layer is 50 to 100 USD that is easily bearable by a salesman who is wandering in the scorching sun.

            While the jacket price with an additional electronic layer for use by the troops in a dessert front, employers of multinational companies or sportsmen playing in the hot sun is 500 to 1000 USD which is also bearable for large organizations.

            I am a post graduate in the sciences from the University of Karachi which is one of top ranked universities of the world with more than 20,000 students. I am a person who is inventing new things from his childhood and won many prizes in science exhibitions during student life. Presently I am working as a professional marketer and a successful businessman and fully aware of the market potential of my invention. The market potential of this product is in billions of dollars. I understand well that I alone have no resources to market my product globally.

            I am interested in working with you in some way that we can introduce this product around the globe. You may directly the purchase manufacturing rights or get a manufacturing and selling lenience or do something other that is in your mind. If you are also interested in Electronic Cooling Jacket, kindly contact me in my email or call me on my cell numbers.

            Sample of product/ drawings/ brief business plan may be provided upon request and after signing a non-disclosure agreement.

            Syed Khalil Ullah
            Cell # +92-307-2550250

            Full details Contact close
          • Coffee Cup Holder for BikesCoffee Cup Holder for Bikes

              Biking has surpassed beyond the world of just exercise enthusiasts. With the advent of the low-slung Cruiser bike style, the popularity of bike baskets; it’s safe to say that the world of biking has progressed far into the mainstream. Everyone from the exercise enthusiast to the average Joe Schmo and his family are buying bike products, joining bike clubs and generally participating within the biking community. However, when surveying my potential consumers about their biking habits, a glaring problem was overturned. These casual new bikers have different bike habits than your Iron Marathon bikers, and more specifically: they’re drinking more than just water. Over 80% of the people I surveyed indicated that they stop for coffee or smoothies while biking and have nowhere to put them. One woman in my focus group even recounted telling a story of buying smoothies on the road for her and her sons, and having to bungee-cord them into their bike baskets. There is no product that adequately allows the casual biker consumer to purchase a coffee or a smoothie and take it with them on their bike. The only options that are available to customers are primarily for water bottles. My product works by way of three rungs attached to a strong, slender backboard which is then attached to the consumer’s bike basket via an R-clamp that would hook over the top of the consumer’s bike basket. Tested in various different simulations and tests, the R-clamp is significant as it was found to tightly grip the top of all different bike basket designs available. The clamp then is attached to the top of the consumer’s bike basket, and the cup would go on the inside!

              Full details Contact close
            • No batteries needed technologyNo batteries needed technology

                In much the same way as you are now using to start your gas grill...

                My invention* completely eliminates the need for batteries in any type of electric or fossil-fuel-powered vehicle.

                Full details Contact close
              • ShoePic\'s It\'s for your ShoesShoePic's It's for your Shoes

                  ShoePic's is a fashion accessory for your Sneaker.
                  ShoePic's is a colorful shoe accessories that is placed on the area of your shoe lace and is held by one, two or three colored stretchy cords. The stretchy cords and 2 cotter pins are pushed through the lace holes and that it’s.
                  You can wear they with one color or two deferent colors on your shoes. At the top of the ShoePic’s is a transparent pocket different motifs can be inserted.

                  Full details Contact close
                • Foldable clothes hangerFoldable clothes hanger

                    Foldable clothes hanger is a new design, increasing the functionality of a traditional hanger with movable arms, allowing their submission to facilitate the removal and placing of clothing on a hanger. This time, it can be done without unfasten a shirt buttons, or in case of jumpers for example, remove the hanger by the collar. Simply push the hook to the housing (with thumb, holding the hanger with pointing and middle finger - just like squeezing the contents of the syringe).

                    Industrial design two-year license for free

                    I'll provide a free, two-year license (for commercial use within the US or China) for the industrial design No.001690330

                    Full details Contact close