Please wait...

You selected inventions in category Electrical Engineering

  • LOW COST SINGLE AND DUAL-AXIS SOLAR TRACKER APPARATUS AND METHODLOW COST SINGLE AND DUAL-AXIS SOLAR TRACKER...
      Preview
      Description

      The solar tracker is a device to rotate solar panels as the sun moves from east to west throughout the day. Solar tracker increases the energy production up to 40% as compared to static solar panel installation but solar tracker costs more than the price of solar panels itself. By completely changing traditional methods and the technology used in the solar tracker, we have made a most inexpensive dual axis solar tracker that collects up to 40% more energy from the sun with a regular solar panel.

      Full details Contact close
    • Externally-mounted Motorized PulleyExternally-mounted Motorized Pulley
        Preview
        Description

        For externally-mounted motorized pulley, electric motor is removed out of the ordinary motorized pulley. And the pulley still with a retarding mechanism is often referred as a retarding drum. The motor is externally connected with the retarding drum to constitute an externally-mounted motorized pulley.
        The externally-mounted motorized pulley is a kind of conveyor driving device between the traditional open-type drive mode from motor to reducer then to the drive pulley and the common motorized pulley driving mode. Because of the external motor, it enjoys good heat dissipation performance and easy repair and replacement. It takes about one-third less than the open-type drive in occupying space and manufacturing materials.
        The externally-mounted motorized pulley is the product of the current industrial requirements. From the logic diagram, the main components are still connected in series, and at least one more drive shaft is needed. From the reliability, there is no increase in reliability. However, due to its good heat dissipation in the motor, convenience installation, maintenance and inspection of the motor, as well as its superiority in occupying space and manufacturing materials to the old open-type drive, the externally-mounted motorized pulley is usually used in high-power externally-mounted motorized pulley, and it is a suitable driving device in some high-power applications.

        Full details Contact close
      • NGW Series Planetary Gear ReducerNGW Series Planetary Gear Reducer
          Preview
          Description

          Overview
          NGW series reducer is an involute spur planetary gear reducer, which adopts advanced technology and novel structure. It is mainly used in metallurgy, mining, cement, lifting, transportation, textile, dyeing, chemical, light industry, etc.

          Features
          1, Light weight, small size: compared with the common cylindrical gear reducer, its weight is reduced by more than 1/2, the volume can be reduced by 1/2-1/3
          2, High transmission efficiency: with single-stage transmission efficiency of 0.97, double-stage up to 0.94, three-stage up to 0.9
          3, Wide transmitted power range: from 1 kilowatt to 1300 kilowatts
          4, Using hard tooth surface which has long service life and wide applicability

          Applicable conditions
          1. The maximum speed of the high-speed shaft does not exceed 1500 rpm
          2, The peripheral speed of the gear does not exceed 10 meters / second
          3, The working environment temperature is -40 ~ 45c
          4, Both forward and backward rotating direction are available.
          The company can also provide ZDY (ZLY, ZSY), DBY (DCY) series crane reducer, NGW (NGW-S, NGW-L), NAD (NBD, NCD), NAF (NBF, NCF), TX series planetary gear reducer, BW (BWY, BL, BLY), X series cycloid reducer, ZJ, ZJY series shaft-mounted reducer, TCJ series gear reducer, and TDY75, JBT (YBT, WBT, YDT, JDT)φ200 -φ1000 motorized pulley of oil-cooled, oil-immersed, exterior-mounted and rubber-coated.

          Full details Contact close
        • Vehicle Tire Track SystemVehicle Tire Track System
            Preview
            Description

            The vehicle tire system is designed to provide all non-SUV vehicles (sedans) with the required equipment to make them function as an all-wheel-drive through all soft lands, whether sand or snow. The apparatus wii generate a continuous solid tracks that protect the tires from getting into the soft land, and then hinder the vehicle from moving. For further details, the patent could be accessed at https://patents.google.com/patent/US9796434B2/en?oq=Tire+vehicle+track+system

            Full details Contact close
          • The Water Engine Pull-to-Start Double VortexEnergy Flywheel GeneratorThe Water Engine Pull-to-Start Double...
              Preview
              Description

              The Water Engine is to be the world's first patented mass market perpetual motion machine. It uses the water increasing speed of two vortices to re-circulate water which is then run through the patented centrifugal design Vortex Turbines to both power the machine and spin electricity generators. The embodiment of the concept for which I am seeking assistance is a small water heater tank sized version which is designed to be indoors and connected to The Grid in order to take advantage of Florida's Net Metering Law which allows customers to sell electricity back to the utility and earn up to $144,000 dollars a month.

              Full details Contact close
            • The professional Bucket Wheel Excavator manufacturerThe professional Bucket Wheel Excavator...
                Preview
                Description

                Bucket wheel excavator is an important mining equipment for large project of great amount of mining and long service, especially suitable for open pit, large earthworks and other applications. The equipment is important during continuous mining process of mining, transportation and casting. Bucket wheel excavator can run continuously with high efficiency and low consumption. Stripping rock by bucket wheel excavator does not need drilling, blasting and other processes, meanwhile, effectively reduces the emission of harmful substances. Bucket wheel excavators can also be used for the mine of good occurrence condition and softer structure.
                According to the equipment structure and rated productivity, bucket wheel excavator can be divided into unloading bridges / large mining; unloading cantilever / compact mining; unloading bridges / giant mining.
                Our company provides all series of bucket wheel excavators in standard or long type, powered by diesel engine or electricity. Non- standard design is also available based on user's requirements.

                Full details Contact close
              • Which is a pforessional manufacture ofWhich is a pforessional manufacture of
                  Preview
                  Description

                  Automated warehouse is a new concept emerged in the logistics and warehousing. As the most advanced technology currently, automated multi-layered warehouse equipment can realize reasonable high-rise arrangement, access automation and easy operation. This kind of warehouse is mainly formed by shelves, alleyway stacking cranes, worktable, automatic transportation and operation control system. Shelf is a buildings of steel structure or reinforced concrete structure, with standard shelf space; alleyway stacking crane shuttles through the shelves to store or pick up cargos. Computer and bar code technology are adopted.

                  Shenyang Juli Mechanical Design Co., Ltd. provides two types of automated warehouse: unibody and split-body, mainly used in industrial production, logistics, manufacturing, etc. Automated multi-layered warehouse can greatly help to improve the space utilization, set up advanced logistics systems and raise production management level. Our professional designers will offer customers with personalized program and maximize the effect of the storage. Welcome to call to inquire.

                  Full details Contact close
                • Intelligent system for detecting tooth decay using piezo vibration and 100 accuracyIntelligent system for detecting tooth decay...
                    Preview
                    Description

                    Always Special attention has been paid to the accurate diagnosis of dental caries in dentistry.
                    To detect dental caries At the occlusal levels via The perfect mirror And at interdental levels The use of radiographs of Bytewing .
                    addition to the cost of Preparing radiographs , It expands the patient to x-rays, which itself has multiple complications.
                    Different radiographic systems are one of the main diagnostic tools in dentistry.
                    As a result of an increase in the number of illnesses resulting from laser imaging that is the result of this radiation , And the increase in radiation damage to humans.
                    The best way to detect with 100% accuracy And without zero percentages, To improve the quality of decay detection and Renounce all the problems listed , Decided to design got this device.

                    The complications and problems of radiographic systems:

                    **Diseases of the skin and cancer caused by x-rays for dentists and patients
                    **Physical complications for pregnant women in embryos
                    **High cost in the preparation and maintenance of radiographic equipment
                    **Lack of accurate diagnosis of decay (detection of up to 60%) Or the separation of amalgam from the tooth (detecting up to 25%) in the restorative tooth By radiography devices
                    **Detection of decay (detection 0%) or separation of amalgam substance from the tooth in restorative tooth by oral sensors

                    ** Specific objectives of the project

                    1. Record the waves from healthy teeth
                    2. Record the waves from the teeth with 0.5 mm cavities
                    3. Record waves from teeth with 1 mm cavities
                    4. Record waves from 1.5 mm cavities
                    5. Record waves from teeth with 2 mm cavities
                    6. Compare the two primitive groups together
                    7. Record radiographs of sample teeth
                    8. Review the synchronization of radiographic images with the designed model

                    ** Applied Schemes

                    • Possibility of examining tooth decay in pregnant women and the elderly
                    • Facilitating the examination of dental caries and studying the separation of amalgam from the tooth in restored teeth ,dont need to go to radiographic centers And exposure to laser radiation (Notably, the most advanced X-ray devices are not able to do it)
                    • High accuracy of detection than radiography devices up to 100% accuracy of detection
                    • Cheaper prices, so all dentists will be able to buy this device
                    • Because of its low cost of service, it does not cost much, and it's a welfare for patients
                    • Avoiding time to go to the radiography clinic and returning to the dentist's office.

                    Teeth are randomly divided into 5 groups of 20 teeth. In groups 1-4, cavities at 0.5, 1, 1.5 and 2 depths in the teeth will be created as a decay model. In the fifth group, no cavity will be created. By contacting the ultrasonic probe with the teeth, the waves received by the detector will be recorded.




                    The next steps are as follows:
                    1- 3D modeling of the device in Solidworkes 2016 Software
                    2. Load dynamic forces and dynamic analysis with MC Adams software
                    3. The loading forces of motion and vibration analysis software ANSYS 17.1
                    4. Vibration testing of teeth with ME Scope software for comparison with modeling analysis
                    Next step The teeth are parallel radiographs and the result will be compared with the model. Statistical analysis of data By one-agent variance analysis and The appropriate follow-up is used to compare two-dimensional groups in groups.

                    At this point, our data will be ready for the device library And the device becomes the program.

                    The cost of the Intelligent system for detecting tooth decay using piezo vibration and 100% accuracy:

                    **Making the original model Body with a beautiful look:2500$
                    **Modal and harmonic vibration testing on 200 human tooth samples ( We will receive from the bank of dentistry of medicin university):19000$
                    **Build a humanoid robot to move and sit on a dental unit To view system performance :4000$

                    Total:65000$

                    Full details Contact close