Please wait...

You selected inventions in category Electronics

  • REMOTE POWER STATE DETECTOR patent us 9390600REMOTE POWER STATE DETECTOR patent us 9390600
      Preview
      Description

      A system for remotely indicating a power state (ON-OFF) of a home appliances This system is easily configurable and flexible tool for smart home security systems and provides a universal and reliable mechanism to control the power state of appliances .The home appliances do not need any adjustment.This system helps to prevent house fires, property damage and save electricity.
       All home and commercial electrical and electronic appliances ,even a gas stove, have a power status LED (light –emitting diode) indicator on the front panel of the devices. The optical sensor,  attached on the top of the power status LED of  the appliance, can be used to determine if the appliance is ON  or OFF.  The power state LED has two states and emits light when appliance is ON and does not - if OFF. Optical sensor  comprises an optical sensor (photo transistor, photo diode or photo resistor...), radio frequency  (RF) transmitter  and battery (or accumulator)  The warning unit  comprises a RF receiver, battery or accumulator  and video and audio alarm device.

      Full details Contact close
    • Vehicle Tire Track SystemVehicle Tire Track System
        Preview
        Description

        The vehicle tire system is designed to provide all non-SUV vehicles (sedans) with the required equipment to make them function as an all-wheel-drive through all soft lands, whether sand or snow. The apparatus wii generate a continuous solid tracks that protect the tires from getting into the soft land, and then hinder the vehicle from moving. For further details, the patent could be accessed at https://patents.google.com/patent/US9796434B2/en?oq=Tire+vehicle+track+system

        Full details Contact close
      • Intelligent system for detecting tooth decay using piezo vibration and 100 accuracyIntelligent system for detecting tooth decay...
          Preview
          Description

          Always Special attention has been paid to the accurate diagnosis of dental caries in dentistry.
          To detect dental caries At the occlusal levels via The perfect mirror And at interdental levels The use of radiographs of Bytewing .
          addition to the cost of Preparing radiographs , It expands the patient to x-rays, which itself has multiple complications.
          Different radiographic systems are one of the main diagnostic tools in dentistry.
          As a result of an increase in the number of illnesses resulting from laser imaging that is the result of this radiation , And the increase in radiation damage to humans.
          The best way to detect with 100% accuracy And without zero percentages, To improve the quality of decay detection and Renounce all the problems listed , Decided to design got this device.

          The complications and problems of radiographic systems:

          **Diseases of the skin and cancer caused by x-rays for dentists and patients
          **Physical complications for pregnant women in embryos
          **High cost in the preparation and maintenance of radiographic equipment
          **Lack of accurate diagnosis of decay (detection of up to 60%) Or the separation of amalgam from the tooth (detecting up to 25%) in the restorative tooth By radiography devices
          **Detection of decay (detection 0%) or separation of amalgam substance from the tooth in restorative tooth by oral sensors

          ** Specific objectives of the project

          1. Record the waves from healthy teeth
          2. Record the waves from the teeth with 0.5 mm cavities
          3. Record waves from teeth with 1 mm cavities
          4. Record waves from 1.5 mm cavities
          5. Record waves from teeth with 2 mm cavities
          6. Compare the two primitive groups together
          7. Record radiographs of sample teeth
          8. Review the synchronization of radiographic images with the designed model

          ** Applied Schemes

          • Possibility of examining tooth decay in pregnant women and the elderly
          • Facilitating the examination of dental caries and studying the separation of amalgam from the tooth in restored teeth ,dont need to go to radiographic centers And exposure to laser radiation (Notably, the most advanced X-ray devices are not able to do it)
          • High accuracy of detection than radiography devices up to 100% accuracy of detection
          • Cheaper prices, so all dentists will be able to buy this device
          • Because of its low cost of service, it does not cost much, and it's a welfare for patients
          • Avoiding time to go to the radiography clinic and returning to the dentist's office.

          Teeth are randomly divided into 5 groups of 20 teeth. In groups 1-4, cavities at 0.5, 1, 1.5 and 2 depths in the teeth will be created as a decay model. In the fifth group, no cavity will be created. By contacting the ultrasonic probe with the teeth, the waves received by the detector will be recorded.




          The next steps are as follows:
          1- 3D modeling of the device in Solidworkes 2016 Software
          2. Load dynamic forces and dynamic analysis with MC Adams software
          3. The loading forces of motion and vibration analysis software ANSYS 17.1
          4. Vibration testing of teeth with ME Scope software for comparison with modeling analysis
          Next step The teeth are parallel radiographs and the result will be compared with the model. Statistical analysis of data By one-agent variance analysis and The appropriate follow-up is used to compare two-dimensional groups in groups.

          At this point, our data will be ready for the device library And the device becomes the program.

          The cost of the Intelligent system for detecting tooth decay using piezo vibration and 100% accuracy:

          **Making the original model Body with a beautiful look:2500$
          **Modal and harmonic vibration testing on 200 human tooth samples ( We will receive from the bank of dentistry of medicin university):19000$
          **Build a humanoid robot to move and sit on a dental unit To view system performance :4000$

          Total:65000$

          Full details Contact close
        • Intelligent systems alternative to anesthetic treatment of dental and medical procedures Without the injection of any Anesthetic and Only using a special fixture For surgery and Dental surgeryIntelligent systems alternative to anesthetic...
            Preview
            Description

            ** Specific objectives of the project:

            • Non-use of anesthetics in dentistry and in the next step for surgery of human organs
            • Measuring the actual rate of pain and fixing it and applying anti-acne in the form of nano-electric shocks

            ** Applied Schemes:

            • Possibility of dental surgery without any pain or stress that is present in all patients referred to the doctor)
            Facilitate dental operations Because of no pain (In most cases, despite the numbness in the intensity is palpable)
            • Not having any side effects for humans in the short or long term
            • Persuading people To provide health for oral and dental health and Increasing social health
            • No pain will be touched by the patient And will not touch any sensation of electrical shock

            Full details Contact close
          • Intelligent Endo Dental Surgical Robot with dental radiography system and webcam and injection of anesthetic plus dental decay Detection Portable intelligent devices via The piezoelectric system with 100% accuracy without any complicationsIntelligent Endo Dental Surgical Robot with...
              Preview
              Description

              ►►AIM OF THE PROJECT
              Dentistry is the branch of medicine that requires a lot of power for a dentist. To
              enhance the quality of dental services and avoid all the problems mentioned and For ease
              of operation such as (Anesthetic infusion, X-RAY Photography, Time Management and
              milling tooth and …) we have decided to design this robot to earn these benefits:
              1- Avoid touch the Dental ando system to lips and tongue
              2- Tooth milling operations by robot
              3- Dental radiography by robot
              4- Video record via robot system in 5MP resolution
              5- Anesthetic infusion To the target by robot
              6- Time management
              7- Reduce of the extra costs
              8- to avoid being exposed to infectious agents such as practitioners (HCV, HBV
              «hepatitis B, C», and bacterial and fungal infections)
              9- Prevention of Musculoskeletal Disorders as "back pain, wrist pain, headaches,
              shoulder pain, back pain, neck pain"
              10- Avoid visual fatigue and premature fatigue.
              11- Avoid exposure to noise pollution
              12- Abatement of exposure to the rays' ionizing or non-ionizing "
              13- prevent skin allergy, allergy
              14- avoid the risks and hazards of chemicals such as mercury dental amalgams,
              resins, sealers and ...
              15- Dental decay Detection intelligent devices via the piezoelectric system with 100%
              accuracy without any complications
              16- In deprived regions by a dentist From anywhere in the world Controlled of the
              Internet (Including the poor and disadvantaged countries that Not respected The
              oral health ،Peoples can Repair the Teeth)

              **Intelligent dental robot video:
              https://www.youtube.com/watch?v=Jl2CZDfAeow
              **Intelligent dental robot video:
              https://www.youtube.com/watch?v=Jl2CZDfAeow

              ►if your company be Enthusiastic to buy Technology and
              technical knowledge of world first intelligent dental robot
              ,Respectfully we are ready to cooperate and send more details
              and movie of this robot
              Special Regards
              Aslan Khani Sheykh Rajab

              Full details Contact close
            • intelligent robotic wheelchairintelligent robotic wheelchair
                Preview
                Description

                Intelligent Wheelchair Benefits :

                1- stair climbing to be quite intelligent image processing system to a height of 25 cm
                2- Crossing the hols and pits or raceway with intelligent image processing system

                3- Raising a disabled wheelchair seat height to the height of about one meter every time a disabled person wants to move in the same state
                4-The final speed of 27 kilometers per hour (as a vehicle for disabled people )

                5- Handling very easy ( the wheelchair for easy disassembly and separate into 8 pieces and includes a removable passenger car
                6- wheelchair batteries charged by solar batteries

                7-Control system via manual control system and image process auto controlling and computer brain interface system

                Full details Contact close
              • Voltage Controlled FilterVoltage Controlled Filter
                  Preview
                  Description

                  The first voltage controlled filters were invented by Robert Moog in 1966. You will find the voltage controlled lowpass filter in every analog synthesizer. I invented a new circuit design for a voltage controlled lowpass filter working with diodes in 2013. This circuit is also useful as sine wave generator from 1Hz up to above 20KHz at nearly constant amplitude.

                  Full details Contact close
                • Freezer LCD separator for Mobile phone LCD Glass Frame 50Hz 41346CMFreezer LCD separator for Mobile phone LCD Glass...
                    Preview
                    Description

                    Freezer LCD separator for Mobile phone LCD Glass Frame 380v 50Hz 41*34*6CM
                    Product Features:
                    1. Separating the Glass.
                    Separating the OCA.
                    Separating the Frame.
                    Separating the Backlight for iPhone, For samsung, For LG, For Sony, For HTC…ect.
                    2. No need to change the polarizer film.
                    3. Can keep the backlight, Also can take off the backlight.
                    How to Use:
                    Put the LCD in freeze pate.
                    After several seconds to 2mins, Based on different screen, Then take out and separate it.
                    Welcome to contact us for operating video.
                    Details information:
                    Functions 1. Glass
                    2. Frame
                    3. OCA, Backlight
                    Working Plug the power cable
                    Color White
                    Voltage 380V
                    50Hz, and 1800w
                    Working area For mobile & Laptop
                    Package size 70x 67 x 124 (CM)
                    Weight 195KG
                    Packing Foam box+Hard wooden box

                    Full details Contact close