Please wait...

You selected inventions in category Energy

  • High efficiency gas cookerHigh efficiency gas cooker

      It could save many tons of CO2 and consumer + "professional" pay for
      this kind of Products.

      The Website is:

      Be sureprise

      Kind Regards from Mönchengladbach / Germany

      Full details Contact close

        A regenerative suspension system comprises a coil spring biasedly coupling a suspended portion of the vehicle to an unsuspended portion of said vehicle. There is provided a magneto-motive damping system arranged inside a housing axially coupled to the coil spring and having a linear generator for transforming the linear displacement into electrical energy and simultaneously damping the vertical acceleration. The regenerative suspension system is further provided with a fluid damping system arranged inside the housing and configured to operate at or above a threshold vertical acceleration and is operatively coupled to the magneto-motive damping system. The fluid damping system is provided with a regulator for varying the fluid pressure within the fluid damping system as a function of vertical acceleration acting on the unsuspended portion of the vehicle.

        Full details Contact close
      • Energy Storage Expandable Composite TanksEnergy Storage Expandable Composite Tanks

          QFX001 holds a patent for a new method to create a super light weight composite to be used for gas storage tanks including energy storage, gas cylinders, air compressors, safety tanks(anti explosion garbage cans) and alternative energy vehicle tanks.

          Full details Contact close
        • Imploturbocompressor -  Coming from Macro-Flow to Micro-Flow by Implossion - Excellence in Design 1 Moving Part System - 1 Compression StepImploturbocompressor - Coming from Macro-Flow to...


            Coming from Macro-Flow to Micro-Flow by Implossion.

            *-“Excellence in Design" because is only one moving part. Only one unique compression step. In flow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

            Presenting one of the many diferents examples, could specifically be this same invention applied in pair in every bar end, similar to what would be a turbine reaction or turbocompressor, and making the best profit of a exhaust gas dynamic flow, compressing a new air entrance and therefore falling into the technical field of the reaction turbines. This of course, considerating materials that are resistant to the high temperatures such as the ceramics ones. And furthermore this invention approaches more the combustion point and therefore also more to the gases expansion point, in order to search a higher expanding dynamic strength. It could, for example, be presented into an inter dynamic rotor system ("Gear Turbine"aplication), supported internally and in a rotating system. And likewise being able to activate a new concept of dynamic turbine by pushing gearing, and likewise, creating a new technical field.
            Or can be in a more simple way by means of the system of this same invention applied to the bar end, but without a movement of interaction with the rotor, only the rotary dynamics in a static point for any type of mechanical work such as a dynamo in order to generate electricity through the dynamic strength of a flow when it is rotating at the moment it receives it, just like a pelton well do.

            And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the flow trajectory.

            In case the flow that is received is a water falling by gravity, and a dynamo is placed on the rotary bar, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before.

            Or only receive the liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the diference of can have an horizontal position, and have wind from all the sides and all the time. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

            Connecting the free end of the bar of this invention to a power plant (manual, electrical, mechanical, or combusting, etc...), there will be available a capacity and a position in order to generate the flow dynamics (or even better, a propulsion). This applied? to gas flows (air) or to liquid flow (water). This of course, considering the due rotating directions as well as the inclination, wings, curvature and the due dimensioning for every application of every technical field.

            ?With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the autoprolpusion of an aircraft. Being an effective and very simple s

            Full details Contact close
          • State of the Art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT - Atypical Motor Engine TypeState of the Art / Novel Rotary-Turbo-InFlow Tech...


              Atypical InFlow Thermodynamic

              Technology Proposal Submission

              Novel Fueled Motor Engine Type


*State of the art Innovative concept Top system Higher efficient percent. 
Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.


YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

              -This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

              *8-X/Y Thermodynamic CYCLE - Way Steps:

              1)1-Compression / bigger

              2)2-Turbo 1 cold

              3)2-Turbo 2 cold

              4)2-Combustion - circular motion flames / opposites

              5)2-Thrust - single turbo & planetary gears / ying yang
6)2-Turbo 2 hot

              7)2-Turbo 1 hot

              8)1-Turbine / bigger


-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.


-Non waste parasitic looses for; friction, cooling, lubrication & combustion. 

              -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass.


-Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept. -Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.

              Full details Contact close
            • Heat Collecting Inflatable Antenna that Also Collects Wind Power In Windy WeatherHeat Collecting Inflatable Antenna that Also...

                Though light and music are easy to find, heat has been not easy to collect for power other than lots of heat for e.g. steam turbines. My invention uses the transparency of somme wavelengths of heat used in other inventor's self cooling materials in an inflatable lense of spherical shape to radiate the heat inward to a central collector.

                Charles Lawson, Inventor.

                The lense takes up no land since it's inflatable and it can be used with other IP like tension collectors on the line to the ground to collect wind power on windy days and or inflatable antenna technology already in use.

                Full details Contact close
              • Modified designs of Vertical Darrieus wind turbineModified designs of Vertical Darrieus wind turbine

                  This type of wind turbine with blade profile has same defect as
                  Darrieus turbines, which are lift-driven, have a higher power potential than the horizontal, or drag-driven turbines. The main flaw with their design is their inability to self-start. Darrieus turbines require an external energy source to bring the device to a minimum rotational speed.

                  So I make same modifying on the shape of the blade to solve this problem

                  This modified design will make two things
                  • Solve the problem of needing to an external energy source to bring the device to a minimum rotational speed .as the impulse force at part of rotation will bring the turbine up when the turbine be with three blades ,
                  And the difference between impulse forces at rotation will bring the turbine up when the turbine be with four blades
                  • The output power will be increase as the impulse torque will add to lift torque to produce more power than original design

                  Full details Contact close
                • Energy-saving motorEnergy-saving motor


                    We have reached to reduce input electric power to electric motor by 90%

                    In other words, that our modified motor will consume 10% from the normal consumption

                    In this video, the average consumption of each phase for the Unmodified motor is 2.29 A,

                    But the average consumption of each phase for the modified motor is 0.22 A

                    At the maximum load for the modified motor consumption up to 2.5 A for each phase

                    But at the maximum load for the Unmodified motor consumption up to 3.5 A for each phase

                    And both Unmodified motor and modified motor have 3000 rpm and 1.5 hp

                    This idea is applicable to all motors various sizes

                    Almost the modified motor does not consume electricity compared to the Unmodified motor.

                    Let's watch this video.



                    We have succeeded in reducing the consumption of electric power for the electric motor to 5%

                    Yes .......... 5% of the basic consumption of the motor without any decrease in engine efficiency

                    For example, if the natural consumption for each phase is 2.29 amp , less consumption of motor will be 0.1145 amp for each phase

                    In the first attempts to reduce consumption, we have reached to 10% of the total consumption of the motor

                    But our latest attempts to reduce consumption is 5% of the basic consumption of the motor

                    This idea is suitable for all kinds of different engines in terms of type, size, and electrical power feeder motor

                    But we are still working on access to less consumption possible

                    This invention will save millions of dollars through energy saving and also increase the demand for buying this type of electric motor energy-saving

                    Please contact us as soon as for the selection of the winning company purchased the invention.

                    Thank you
                    For contact :

                    Eng mina morcos : 002 01273587909

                    Email :

                    Facebook : mina morcos

                    Mr abanoub nage : 002 01276777185

                    Email :

                    Facebook : abanoub nage

                    Full details Contact close