Please wait...

You selected inventions in category Energy

  • Flat planar concentrator of solar energyFlat planar concentrator of solar energy
      Preview
      Description

      Concentrating of solar energy is a highly important task in the field of development of solar energy systems. The main principle of concentration is the focusing of solar lights on a smaller area of receiver either semiconductor solar cell or thermal absorber. Thus, the application of concentrators allows to reduce the amount of expensive solar cells or thermal receivers and to reduce the price of the solar energy system.
      Existing solar energy concentrators, either mirror-reflection or lens-refraction based, have many disadvantages and economically are not effective.
      Completely new, low cost, high efficient flat planar concentrator of solar rays is proposed. Concentrator has several advantages in comparison with existing parabolic through or Fresnel lens type concentrators. The proposed concentrator has the simple planar panel structure and it does not require a significant focal distance. The solar rays are incident to the flat surface and concentrated on to the one edge of panel, where the receivers are placed. The efficiency of concentrator is 80%. The other advantages are simplified sun tracking, less wind loading and small maintenance costs.
      The proposed innovation is a cardinally new approach in solar technologies. The concentrator effectively can be used for concentration of solar rays and transformation of solar energy into electric or thermal energies.

      Full details Contact close
    • variable gear assemblyvariable gear assembly
        Preview
        Description

        Variable gear assembly where any gearing ratio can be selected, with no interruption in drive. Final drive from gear assembly is also positive, so no loss of power occurs. This unique design can be used in all kinds of transport, and other applications where geared drive power is needed. To be revealed under intellectual property agreements (NDA), and proof of concept prototype to be made with interested parties. Later development, refining, and commercialization to be done under agreement such as licensing rights/royalty rights/buyout rights/share in profit rights- whichever is most suitable. Should be of interest to auto and gearbox manufacturers.

        Full details Contact close
      • self propelling rotary mechanismsself propelling rotary mechanisms
          Preview
          Description

          Experimental self propelling, rotating mechanisms, as a source of motion and energy. Not dependant on gravity or magnetic forces, and can function in any orientation and most environments. Systems are scalable from model size to ship engine size or more. As these designs are experimental, proof of concept prototypes need to be made with interested parties, and done under intellectual property agreements. Later development to be done with licensing rights/buyout rights/share in profit rights, whichever is most suitable. These designs should be of interest to energy and power research and development, related companies and organizations, venture capital, angel investors, licensing and commercialization companies, etc, who are interested in future energy solutions.

          Full details Contact close
        • Non Electric Manual Pneumatic Portable FanNon Electric Manual Pneumatic Portable Fan
            Preview
            Description

            Now a days the domestic fans used are consuming electric power and can not be used in the places of inflammable risk and congested rooms. In the places of inflammable risk, for example mines, the petroleum refining plants etc., we can not use the fans using electric current is not safety and handled with more precautions. The residencies located in the air congested places are not suitable to use the electric fans inside the rooms. It may cause the burning of coils of armature. This non electric manual portable fan eliminates the electric power and coil by air and fins.
            Filling the air by pumping manually (or by any pumping device) through the mouth of the balloon stores the air to get energy to rotate the rod. Filling the balloon may be done at some other place by any compressor. Then the balloon may be placed at the clip of the stand. The balloon nozzle releases the air with sharp and high pressure on the fins of the rod to rotate the rod. The fan leafs connected with the rod by ball bearing get rotated by air pressure. The pressure inside the balloon may be controlled using valve and the required pressure level can be maintained. The speed of the fan leaf can be controlled by adjusting the knob fitted at the nozzle. For filling the balloon the manual pumping may take one or two minutes but it rotates for several minutes.
            It may be used not only the domestic purpose but also for camp purposes of various inflammable places even there is no electric power. The manufacturing cost of this fan unit is very less comparing the electric fans. So lakhs and crores of this fan unit may be sold in various countries. The under developing countries where the electric power production is not sufficient also utilize this fan unit. It is protected on the provisional patent application number US62/015,470. It is ready for sale for mere 2000USD.
            My E-mail ID:bkraman2014@gmail.com
            contact number:+91-965-959-8088.

            Full details Contact close
          • No batteries needed technologyNo batteries needed technology
              Preview
              Description

              In much the same way as you are now using to start your gas grill...

              My invention* completely eliminates the need for batteries in any type of electric or fossil-fuel-powered vehicle.

              Full details Contact close
            • CARBON NANOPARTICLES SYNTHESIS BY FLAME DEPOSITON ON GRAPHITE ANODE FOR MICROBIAL FUEL CELLCARBON NANOPARTICLES SYNTHESIS BY FLAME DEPOSITON...
                Preview
                Description

                Carbon nanoparticles are obtained by burning mustard oil with the aid of wick and collected on graphite. The wick used is made of cotton mixed with synthetic fibres. This carbon nanoparticles coated graphite is then used as anode in microbial fuel cell.

                [PCT International Patent Application No. WO/2014/080419 - CARBON NANOPARTICLES SYNTHESIS BY FLAME DEPOSITON ON GRAPHITE ANODE FOR MICROBIAL FUEL CELL]

                Full details Contact close
              • SYNTHESIS OF CARBON NANOPARTICLES FROM VEGETABLE OIL BY FLAME DEPOSITIONSYNTHESIS OF CARBON NANOPARTICLES FROM VEGETABLE...
                  Preview
                  Description

                  Although different methods for synthesising carbon nanostructures are available, research is still going on for finding the cheap and easy method for commercial preparation of different carbon nanostructures with controlled moiphology and high purity. The carbon soot obtained from burning of vegetable oils and animal based oils by using traditional method is found to contain carbon nanostructures including single-walled carbon nanotubes, multi- walled carbon nanotubes and carbon nanofibers. Carbon soot obtained by burning oils has been used as 'kajal' since ancient times. Kajal is easy-to-make by traditional method of flame deposition. It has been. found to contain carbon nanomaterials. Thus, synthesis of carbon nanostructures from vegetable oil using flame deposition method is studied in detail in regard to find a cheap source and easy method.

                  [PCT International Patent Application No.WO/2014/080418 - SYNTHESIS OF CARBON NANOPARTICLES FROM VEGETABLE OIL BY FLAME DEPOSITION]

                  Full details Contact close
                • buoyancy force for perpetual motionbuoyancy force for perpetual motion
                    Preview
                    Description

                    it's a way to produce perpetual motion from buoyant and floating power , it use a new technology to produce perpetual motion without any kind of fuel , just we need a pool of water we don't need to moved water .

                    Full details Contact close