Please wait...

You selected inventions in category Energy

  • Solar plant for the production of electrical and thermal energySolar plant for the production of electrical and...
      Preview
      Description

      The invention is a combination respectively a hybrid collector in which through concentration and the cleavage of the sunlight the waves in a length of 1000nm get concentrated and cooled on the solar cell. The thermal energy is recovered by another heat dissipating circuit.

      Problem
      Photovoltaic systems and solar thermal systems have various modes. The operating principle of photovoltaic systems is based on the heating of semiconductor cells, which convert sunlight into electricity. The disadvantage here is that the efficiency on the basis of semiconductor cells heating can be reduced by up to 30%.
      Thermal solar systems, on the other hand, take advantage of the warmth of the sunlight. But the problem with solar thermal systems is that they disregard the "electric part” of the solar radiation.

      Solution
      The invented solar plant combines the operation of photovoltaic and thermal solar systems. The combination respectively the hybrid collector thus enables greater energy efficiency, as both the "electric" and the "thermal" part can be converted.

      Full details Contact close
    • Fabrication and Material Design of Transparent Solar Cell WindowFabrication and Material Design of Transparent...
        Preview
        Description

        A transparent solar cell using NiO has been fabricated. This solar cell absorbs only UV light for generating energy and let the visible light pass through so that looks transparent. Such transparent solar cell can extend the applicability of solar cells to variuos areas, such as house window, car front window, mobile electric devices and etc. The present technology will bring this promising concept to realization. In addition, the Ni material, which is used in this technology, cost much less and non- toxic, compared with Si and other materials used in the existing solar cells. This advantage would help much for mass production.

        Technology Benefits:
        •Lower cost than Si and other materials such as In Ga.
        •Safe (non-toxic) and eco-friendly
        •Transparent: Absorbs only UV radiation for power generation

        Possible Applications:
        Home window, High-rise building window, Car front window, Layered over the existing solar cell systems

        Possible Collaborations:
        Collaborative research, License

        Full details Contact close
      • A DEVICE AND METHOD FOR ALTERING THE SHAPE OF STRING CABLE CORD OR  SIMILAR MATERIALA DEVICE AND METHOD FOR ALTERING THE SHAPE OF...
          Preview
          Description

          Headphones have become ubiquitous within the modern world; and for good reason, people love their music. Understandably, people hate when something comes between them and their music. Unfortunately, headphones often become a vexing obstacle between the user and their music. Anybody who uses headphones will tell you that one of the most aggravating situations is when their all set to listen to their music, they get their media device out only to find the cables in a tangled mess.
          Although untangling the headphones only takes a few minutes this is an inconvenience the user would rather not deal with. Enthusiasts and headphone producers have long recognized the problems associated with tangled cables, spending millions of dollars in research and development. Unfortunately, the result of this research has created subpar products that are either too inconvenient to use or are ineffective at improving the users experience. It has been proven many times that users are unhappy with the current headphones design and their poor tangle resistance. Moreover, there is a proven market for solutions. For example, one of many market proven products includes the Kickstarter Project CordCruncher, the project raised over $66,000 in just 30 days (http://www.kickstarter.com/projects/1587181400/cordcruncher-earbud-headphones). There are many other Kickstarter Projects that have raised over $600,000 for cable solutions.
          Our solution has the same functionality as the Cord Cruncher Headphones, and more. The product would be cheaper, more versatile, and convenient to use; solving the annoying problems associated with tangled, damaged, strained, or knotted headphone cables while opening up possibilities for more creative uses of headphones. The solutions functions by using a special wire integrated into the headphone cable, the wire is commonly known as memory metal and has riveting properties. The memory metal allows the user to use the headphones, as they normally would, however in order to conveniently wrap the cables up for storage the user may press a button that causes the memory metal to return to a predefined shape. Useful predefined shapes may be a tidy coil, compact winding that contours to an electronic device, or even an Apple Logo! The possible shapes, sizes, and configurations are endless; any shape that cables can be wound into can be achieved automatically by using integrated memory metal. Custom designs may include the user name, a word, or customer design.

          Full details Contact close
        • MAPEMAPE
            Preview
            Description

            A self sustaining source of energy that uses Magnetic Acceleration Propulsion Energy to create easy, reliable energy. I invented the MAPE in 7th grade and wish to give it a go. Please, contact me for more information. I have no Patents, etc. So if one wishes for a further explanation, I will gladly speak. I am looking for fellow inventors to join this cause, as well as investors to help fund. I wish to eliminate the current fuel industry and replace it with a cleaner, more reliable form of energy for all the world to use. Please, contact me at nikolaskeosaia@yahoo.com for more information. Thank you.

            Full details Contact close
          • Autonomous system of photovoltaic energy productionAutonomous system of photovoltaic energy...
              Preview
              Description

              Patente Española – nº 200802074
              Titulo: SISTEMA AUTÓNOMO DE PRODUCCIÓN DE ENERGÍA FOTOVOLTAICA.
              Fecha de concesión: 15 de Abril de 2011.
              Titular: Manuel José Baquero Menéndez.
              Domicilio: Carangas
              Localidad: Ponga
              Comunidad: Asturias.


              The autonomic system, (Autonomous means that this device does not require any external energy source, no sun, no moon, no connection to any conventional power source, generators and power grids). PV production is a clean and economical way to produce electricity.

              Example of use:

              In a house of 100 m / 2, fully electrified (hot water, heating, appliances, lighting, air conditioning, etc..) Eight 240 W photovoltaic panels, each producing 1296 Kw., A month, is enough energy to meet the needs of the house described in the example.

              The Unit with all its elements, occupies an area of one meter square.

              For small and medium industries in an area of 10 m / with 2 and panels of the same power, you will get 712 kW Per day.

              Both at home, and in small and medium industry, the outlined production quantities are the maximum productivity you will get since the system is designed to produce the energy it consumes.

              Putting his device into manufacturing and marketing, this system will greatly reduce energy consumption of fossil materials, non-renewable, in Spain and the rest of the European Union. Another advantage is the elimination of transport of energy (high voltage lines) and the expenses and inconvenience caused in our citys, because I consider it a waste, to transport energy that can be produced in place.

              Full details Contact close
            • New sources of energyNew sources of energy
                Preview
                Description

                new energy sources.
                Use gravity (gravity), geothermal effect (warm ground), solar energy, power flows of rivers, the wind.
                Maximum security.
                For the staff, (for maintenance), environment (ecology), for the state (strategic security).
                High efficiency. High power (from 1KVt to 1000 MVt and more). Universal application.
                The minimum cost price of electricity.

                1 - power converter steam (air), low pressure. Patent RF 2215183.
                When small amounts has enormous potential power. No competition. Able to replace nuclear
                power, hydropower, thermal power plants.

                2 - inverter air flow (of water). Patent RF 2219369.
                more efficient than traditional turbines. When used in water can replace the hydroelectric power station.

                3 - know-how. Super battery. The new principle of accumulation of electricity.
                Able to replace hundreds of conventional batteries

                Full details Contact close
              • Internal Combustion Engine - Hybrid Engine - Stirling EngineInternal Combustion Engine - Hybrid Engine -...
                  Preview
                  Description

                  A Hellenic (Greek) Laboratory, specialized in Pure Mechanical Systems, has developed a Transmission Mechanism with many important Applications, being a Hardware which can run any corresponding Software (Operating Cycle).
                  In collaboration with several Industries and Universities, a large Programme ("THE DOT project") is in operation in order to search thoroughly any possible Application.
                  This Mechanism and some of its Applications have until now two International Patent Applications, both with excellent Search Reports:
                  http://www.wipo.int/pctdb/en/wo.jsp?WO=2007125373,
                  http://www.wipo.int/pctdb/en/wo.jsp?WO=2009040588.
                  Any publishable detail until now for the whole "THE DOT project" is at:
                  http://www.synison.gr/on-the-dot-revolution!.htm.
                  One of the most important Applications is a breakthrough in Engine Technology, having these major versions:
                  - Advanced Internal Combustion Engine,
                  - Advanced Stirling Engine,
                  - Advanced Hybrid Engine.
                  A version of this Stirling Engine operates with Solar or Geothermal Energy, so it is most promising in poor Countries with broad sunshine or with volcanic or geothermal activity.
                  There are, currently, under further development these versions:
                  - Internal Combustion Engines (Classic Otto/Classic Diesel),
                  - Internal Combustion Engines (Isovolumic Otto/Atkinson/Isobaric Diesel),
                  - Internal Combustion & Electric Hybrid Engine,
                  - External Combustion Stirling Engines (Multi-Fuel),
                  - External Combustion Stirling Engine (Liquid Oxygen),
                  - External Combustion & Electric Hybrid Engine,
                  - Steam Engine (High Efficiency),
                  - Solar & Geothermal Stirling Engines (High Efficiency),
                  - Solar & Geothermal Stirling Engines (Low Cost Construction & Maintenance Free),
                  - Domestic Heating & Stirling Hybrid Engine.
                  A Consortium under formation is looking for more Partners for the Production of the Mechanism or its Applications, who must be strong enough in their Commercial field in order to achieve a successful penetration in the Market.

                  The Asking Price of 12,000,000 E corresponds to 100% of Rights for All Countries of Protection.
                  Currently there is an Offer: 1,000,000 USD for 45% of Rights for USA only.
                  The aforementioned Prices could be negotiated, depending on the Market Potential of the prospective Buyer (for example: the Offer is modified to simply 0,00 E OR 0,00 USD AND 1% of the Rights, when the Buyer is a big Automotive Industry).

                  {OLDER PUBLICATION/INVITATION}
                  A Hellenic (Greek) Laboratory, highly specialized in Pure Mechanical Systems, has developed an Innovative Transmission Mechanism with many significant Applications and is looking for license agreement and/or technical cooperation agreement and/or Partners involved in the production of the Mechanism and/or its Applications.
                  This Transmission Mechanism (DOT: Distributive Oscillating Transmission) interconnects, in the most effective way, a plurality of Elements with a main Shaft, said Elements and Shaft rotating coaxially around a common axis with different but completely programmable angular velocities.
                  This interconnection is achieved via planetary systems with some non-circular gears which have almost the same mechanical efficiency as the standard ones.
                  The aforementioned Transmission Mechanism can perform literally any desired Cycle, Thermodynamic or not, even one with an odd number of asymmetrical strokes, with the greatest possible degree of mechanical efficiency in both directions.
                  One major application of this Transmission Mechanism is an Advanced Internal Combustion Engine (THE: Toroidal Hermetic Engine) with Three Rotating Toroidal Pistons, performing in the simplest possible way an almost Ideal Thermodynamic Cycle:
                  - Intake (of pure air-fuel mixture or mixed with exhaust gas, if necessary),
                  - Compression (up to any desired Compression Ratio),
                  - Combustion (Isochoric, for any desired Period, almost exactly or exactly, if necessary),
                  - Expansion (for any desired Period,..

                  Full details Contact close
                • PATENT HOLDER AT OAPI/ WIPO ON A MOBILE GUITAR  WISHES TO LICENSE/SELLPATENT HOLDER AT OAPI/ WIPO ON A MOBILE GUITAR ...
                    Preview
                    Description

                    INTRODUCING THE MOBILE GUITAR “PATENT HOLDER OF OAPI/WIPO” SINCE 2005

                    We write to you today to introduce and at the same time solicit your interest to partner with a client of ours who has invented a guitar called;
                    THE MOBILE GUITAR
                    A guitar which is electromagnetic and functions without being connected to current flow or electricity.
                    A guitar which uses rechargeable batteries and these batteries has the capacity to last for 5 hours.

                    A guitar which produces 3 sound systems
                    a- The bassist
                    b- The soloist
                    c- The rhythmic
                    Please, we welcome your propositions as it is negotiations that we are opening.
                    For a check of DUE DILIGENCE, contact the American Embassy in Cameroon or the WIPO office in the USA and we shall give you our Patent title number.

                    Full details Contact close