Please wait...

You selected inventions in category Engineering

  • DC circuits FilterDC circuits Filter
      Preview
      Description

      DC current Filter (DCF) designed for all circuits of devices if in it there is AC to DC conversion or/and filtration-smoothing or need a lightning/surge defence like an Energy Saving Lamps (ESL), TV, Video, Computer, Charger, Electronical Transformers, Welding Equipment, space-air-marine-submarine vehicles onboard systems, cars trucks, trams, trolleybuses, underground trains, similar
      Results of measuring in self-made model:
      1 If zero of measurements – diode rectifier exit – smoothing is 75-80 dB, radiofrequency noise reduction is 70-75 dB, efficiency 98-99%. Like best microchip based filters. But if current of the load less 25-50% of normal – decrease of only smoothing – will be pulsations in exit. If load more then 150-200%-more% of normal – overheat (and burn – depends on the wire insulation) of the DCF.
      2 DCF can correct Power Coefficient (PCC function) in range +/- 60 degree with out additional device. If the load less then 10000 Watt – it should be corrected but not must be because it is very expensive and the economy of 11% of primary energy (110/220 Volts 50/60 Hertz or another) – possible these lost and additional influence to power greed due to very expensive PCC units. Cheapest in the World solution.
      3 Temperature range of DCF is in limits of Kuri temperature of ferromagnetic core of the DCF. And ionizing radiation resistance/strong ness like at a the used wire insulation – the World best lifetime and reliability.
      4 Economy size and weight 25-50% of similar efficiency LC filter, whorster then best microchip based impulse kind filters in 10-20%. Slightly simpler and faster production of any device due to DCF more simple common design of the side of board/it’s wiring.
      5 In circuit 12Volt 6 Amperes the DCF defence load against 4 mikroFarade 330-340 Volt capacitor any polarity discharges every 0.5 seconds or rarely. Against any surge like a lightning over voltage in now days designs it is impossible with out very expensive ultra fast diode and varistors and high voltage capacitor jointed and displaced especially.
      6 DCF can be produced at any industrial designed for a transformers/a bobbins/a magnetic relay producing robotized line as an element or unit or small board or similar. DCF looks like a transformer but must be connected only DC-pulsing input – wire 1+ and 2- and exit wire 3+ and 4-, wire 5 is control – for decrease smoothing if necessary to be avoided limitation (8-9 times of normal) of start current shock – there is the limitation if no any current in wire 5 (polarity is +) to wire 2. I don’t know where is necessary the limitation avoiding. The limitation is useless if there is short circuit after DCF a fuse necessary.
      7 With 2 diodes 2 parallel DCF or 1 DCF in diagonal of 4 diode rectangle rectifier with AC input and AC output (as 2 polar kind unit) can work in any AC systems but there is not money kind voices for similar solution. Now days LC anti noise filters for an industrial AC systems really rare because just need not so deep smoothing or noise rejection – there is defence of electronical and relay control units and other devices are not miss work due to a noise. Or it is enough ordinary anti over voltage dischargers.
      8 No any active elements inside. Only core and wire and capacitors inside. In my model all less 55-60 volts by description.

      Full details Contact close
    • Continuous flexible process control via 3D surface and geometry measurements in productionContinuous flexible process control via 3D...
        Preview
        Description

        A new development for Surface & Geometric Dimensioning and Tolerancing (GDT) measurements;
        Current instruments widely in use are Coordinate Measurement Machines (CMM) which are very time consuming, e.g. time for a car door measurement may take up between 6 to 8 Hrs.;
        Our equipment will do the same measurement for the same object in less than 20 seconds;
        We have reached production practice. All future changes are mainly Software related only, e.g. “tweaking measurement time”.

        The market, Aero, Military, Automotive etc. needs Equipment which will Measure accurately from the smallest part to the largest panel continuously in a assembly line, e.g. CMM’s cannot provide this;
        Our Scanning Equipment can be integrated in a manufacturing line and measure parts faster and more economical than machines in use.
        This will save on expenditures, increase overall Product Quality and Profits

        The technology is a powerful system using building blocks and a new technology based on a photogrammetric approach to recover three-dimensional information.
        The Scanner is using „Building Blocks“. It is possible to serialize or parallelize several single scanner into one sizeable scanner matrix which allows for large surfaces to be measured.
        Therefore the measurement and analysis of large point clouds towards measurement results against CAD data will be much faster and more accurate.

        Full details Contact close
      • Vertical Bicycle ParkingVertical Bicycle Parking
          Preview
          Description

          This project I designed to give maximum theft protection, damage protection and save the space more than 50% comparing with conventional bicycle parking system. This device is extendible from 1 to… and fits to any indoor or outdoor space. Product has full patent and industrial protection in EU and USA. All options are open for discussion, licence…

          Full details Contact close
        • High aspect dynamic lift boat hullHigh aspect dynamic lift boat hull
            Preview
            Description

            Decrease in hydrodynamic resistance
            Increase in useful loading and speed of the ship

            1. Reduction of used engine power and fuel consumption.
            2. High speed, manoeuvrability and controllability.
            3. High dynamic stability on all modes, including impossibility of overturning.
            4. The maximum decrease in shock dynamic loadings.
            5. High Seaworthiness

            Full details Contact close
          • Automatic sensor LED lightingAutomatic sensor LED lighting
              Preview
              Description

              The traditional pyroelectric sensor (or a sound sensor) and the combination of light source, without reserve electric wire, place the product directly on the lamp and turn on the power. When the LED lights to the sound or body heat sensor, the automatic lighting (sensing distance of about 6-7 meters, induction angle 90-120 degrees) away from the time when the sound or heat. LED lights automatically turn off delay of 20-30 seconds(may adjust for 5-60 seconds). This product is suitable for supermarket, stairways, corridors, entrance, kitchen, toilet, warehouse, garage, balcony and other places. The power source according to the UL modular design, the light bulb weight only 195 grams, the light bulb diameter is 75mm, the length is 120mm. Power supply AC: 85V-265V, Universal worldwide voltage, 9 watts of power, equivalent to 90 watts of ordinary light bulb brightness. More than 5 years of life, all products made with environmentally friendly materials(ROHS) in line with energy saving and environmental protection requirements. Simple shell shape and bright, fully show the beauty of elegance.

              Full details Contact close
            • Bird Perch and Waste ContainmentBird Perch and Waste Containment
                Preview
                Description

                APP # 20100199920

                http://appft1.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PG01&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.html&r=1&f=G&l=50&s1=%2220100199920%22.PGNR.&OS=DN/20100199920&RS=DN/20100199920

                INVESTORS: This is the hamster-wheel of the bird world!

                I tried to launch SwivelPerch.com but ran out of resources to be successful. Product as shown in patent (pending) had a great response at a bird show but without seed money.

                Waste containment technology will improve EVERY bird cage sold -eliminating the grate, improved look, easy maintenance.

                Swivelling perch system stimulates pet, maximizes recreation with minimum waste profile.

                Sale or licensing negotiable

                Full details Contact close
              • Patent Sale of Biometric Immobilizer for AutomobilePatent Sale of Biometric Immobilizer for...
                  Preview
                  Description

                  Biometric immobilizer is a controlled unit protecting a motor vehicle against unauthorized use or allows the access of a motor vehicle by the rightful owner.

                  US Patent No. 5,675, 490 entitled"Immobilizer For Preventing Unauthorized Starting Of A Motor Vehicle And Method For Operating The Same" discloses an immobilizer including a test unit, control devices connected through a data line to the test unit, and at least one ignition key having a transponder. When the ignition key is actuated, the test unit transmits a request signal through the data line to all of the control devices, which respond thereto by transmitting back identification codes which are compared with desired codes. The test unit prevents starting of the motor if less than a prescribed number of control devices reply with their identification code.

                  Full details Contact close
                • The acitve ladder truck ladderThe acitve ladder truck ladder
                    Preview
                    Description

                    This design is a major change in fire fighting ladder truck design.
                    The design allows the fire fighter to ride up the ladder, saving energy. It also allows the fire fighter to send incapacitated people down the ladder alone, allowing the fire fighter to continue his/her work. This design also allows extra supplies/equipment to be sent up or down without a human being put in further danger.
                    The automation for this design is critical. The ladder framework will be re-designed to deal with the special ladder.
                    This design allows the ladder truck to do things a 'cherry picker' type cannot do, or cannot do without serious uses of energy and manpower.

                    Full details Contact close