Please wait...

You selected inventions in category Green Energy

  • A REGENERATIVE SUSPENSION SYSTEM FOR A VEHICLEA REGENERATIVE SUSPENSION SYSTEM FOR A VEHICLE
      Preview
      Description

      A regenerative suspension system comprises a coil spring biasedly coupling a suspended portion of the vehicle to an unsuspended portion of said vehicle. There is provided a magneto-motive damping system arranged inside a housing axially coupled to the coil spring and having a linear generator for transforming the linear displacement into electrical energy and simultaneously damping the vertical acceleration. The regenerative suspension system is further provided with a fluid damping system arranged inside the housing and configured to operate at or above a threshold vertical acceleration and is operatively coupled to the magneto-motive damping system. The fluid damping system is provided with a regulator for varying the fluid pressure within the fluid damping system as a function of vertical acceleration acting on the unsuspended portion of the vehicle.

      Full details Contact close
    • YOSTICKYOSTICK
        Preview
        Description

        Many people would like to move faster, because they are getting pleasure from it. So as to give people this opportunity, we have developed yostick: environmentally friendly vehicle for active recreation. The driver of the yostick stands on conventional roller skates or skateboard, and yostick allows to move with great speed, without putting the great effort. Unlike competitors, yostick has very simple design, so the price of this product would be quite low. Using the yostick is allowed to move quickly on foot or bicycle paths and overcome any irregularities, which could meet on the way. Yostick guarantees safety and stability due to the location of the points of support, which is control by the driver. Moreover, in combination, for example, with the roller skates, yostick is a very maneuverable vehicle and indicate a minimal threat to pedestrians. There is no doubt that lots of extreme and pro riders will be fond of yostick, but the target audience for this product is much wider. The majority of roller fans skates in locations which are not far from their homes. Constant skating in one place couldn’t bring any new sensations. Yostick gives exceptional feelings from skating in usual places and it allows to make a real journey through the city to everyone.

        International Application No. PCT/RU2014/000880 is registered.

        I plan to use Kickstarter to collect the money for the first batch production. Looking for business partner/investor who can register a company in US or EU preferably for effective crowdfunding. All exclusive rights on yostick will be transferred to this company for free. I think the further production of yosticks can be arranged in China.

        These photos and videos presents yostick's prototypes only. Production model and design are not developed yet.

        Contacts
        E-mail: mr.yostick@gmail.com
        Skype: airdisk1

        Full details Contact close
      • lightweight Backpacklightweight Backpack
          Preview
          Description

          Many climbers or those with a specific purpose to carry heavy Backpacks are always suffering from the heavy weight of their Backpacks . so we could make the Backpacks that not only its own weight but the weight of its load was divided into good and easy to carry. With " compressed Helium gas " in special layers of Backpack . And to calculate the amount of gas in the Backpack to make different Backpack with different usages.

          Full details Contact close
        • Imploturbocompressor -  Coming from Macro-Flow to Micro-Flow by Implossion - Excellence in Design 1 Moving Part System - 1 Compression StepImploturbocompressor - Coming from Macro-Flow to...
            Preview
            Description

            Imploturbocompressor

            Coming from Macro-Flow to Micro-Flow by Implossion.

            *-“Excellence in Design" because is only one moving part. Only one unique compression step. In flow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

            Presenting one of the many diferents examples, could specifically be this same invention applied in pair in every bar end, similar to what would be a turbine reaction or turbocompressor, and making the best profit of a exhaust gas dynamic flow, compressing a new air entrance and therefore falling into the technical field of the reaction turbines. This of course, considerating materials that are resistant to the high temperatures such as the ceramics ones. And furthermore this invention approaches more the combustion point and therefore also more to the gases expansion point, in order to search a higher expanding dynamic strength. It could, for example, be presented into an inter dynamic rotor system ("Gear Turbine"aplication), supported internally and in a rotating system. And likewise being able to activate a new concept of dynamic turbine by pushing gearing, and likewise, creating a new technical field.
            Or can be in a more simple way by means of the system of this same invention applied to the bar end, but without a movement of interaction with the rotor, only the rotary dynamics in a static point for any type of mechanical work such as a dynamo in order to generate electricity through the dynamic strength of a flow when it is rotating at the moment it receives it, just like a pelton well do.

            And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the flow trajectory.

            In case the flow that is received is a water falling by gravity, and a dynamo is placed on the rotary bar, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before.

            Or only receive the liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the diference of can have an horizontal position, and have wind from all the sides and all the time. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

            Connecting the free end of the bar of this invention to a power plant (manual, electrical, mechanical, or combusting, etc...), there will be available a capacity and a position in order to generate the flow dynamics (or even better, a propulsion). This applied? to gas flows (air) or to liquid flow (water). This of course, considering the due rotating directions as well as the inclination, wings, curvature and the due dimensioning for every application of every technical field.

            ?With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the autoprolpusion of an aircraft. Being an effective and very simple s

            Full details Contact close
          • State of the Art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT - Atypical Motor Engine TypeState of the Art / Novel Rotary-Turbo-InFlow Tech...
              Preview
              Description

              GEARTURBINE PROJECT


              Atypical InFlow Thermodynamic

              Technology Proposal Submission

              Novel Fueled Motor Engine Type

              

*State of the art Innovative concept Top system Higher efficient percent. 
Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

              

YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

              -This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

              *8-X/Y Thermodynamic CYCLE - Way Steps:

              1)1-Compression / bigger

              2)2-Turbo 1 cold

              3)2-Turbo 2 cold

              4)2-Combustion - circular motion flames / opposites

              5)2-Thrust - single turbo & planetary gears / ying yang
              
6)2-Turbo 2 hot

              7)2-Turbo 1 hot

              8)1-Turbine / bigger

              

-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.

              

-Non waste parasitic looses for; friction, cooling, lubrication & combustion. 

              -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass.

              

-Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept. -Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.

              Full details Contact close
            • Heat Collecting Inflatable Antenna that Also Collects Wind Power In Windy WeatherHeat Collecting Inflatable Antenna that Also...
                Preview
                Description

                Though light and music are easy to find, heat has been not easy to collect for power other than lots of heat for e.g. steam turbines. My invention uses the transparency of somme wavelengths of heat used in other inventor's self cooling materials in an inflatable lense of spherical shape to radiate the heat inward to a central collector.

                Charles Lawson, Inventor.

                The lense takes up no land since it's inflatable and it can be used with other IP like tension collectors on the line to the ground to collect wind power on windy days and or inflatable antenna technology already in use.

                Full details Contact close
              • Flat planar concentrator of solar energyFlat planar concentrator of solar energy
                  Preview
                  Description

                  Concentrating of solar energy is a highly important task in the field of development of solar energy systems. The main principle of concentration is the focusing of solar lights on a smaller area of receiver either semiconductor solar cell or thermal absorber. Thus, the application of concentrators allows to reduce the amount of expensive solar cells or thermal receivers and to reduce the price of the solar energy system.
                  Existing solar energy concentrators, either mirror-reflection or lens-refraction based, have many disadvantages and economically are not effective.
                  Completely new, low cost, high efficient flat planar concentrator of solar rays is proposed. Concentrator has several advantages in comparison with existing parabolic through or Fresnel lens type concentrators. The proposed concentrator has the simple planar panel structure and it does not require a significant focal distance. The solar rays are incident to the flat surface and concentrated on to the one edge of panel, where the receivers are placed. The efficiency of concentrator is 80%. The other advantages are simplified sun tracking, less wind loading and small maintenance costs.
                  The proposed innovation is a cardinally new approach in solar technologies. The concentrator effectively can be used for concentration of solar rays and transformation of solar energy into electric or thermal energies.

                  Full details Contact close
                • self propelling rotary mechanismsself propelling rotary mechanisms
                    Preview
                    Description

                    Experimental self propelling, rotating mechanisms, as a source of motion and energy. Not dependant on gravity or magnetic forces, and can function in any orientation and most environments. Systems are scalable from model size to ship engine size or more. As these designs are experimental, proof of concept prototypes need to be made with interested parties, and done under intellectual property agreements. Later development to be done with licensing rights/buyout rights/share in profit rights, whichever is most suitable. These designs should be of interest to energy and power research and development, related companies and organizations, venture capital, angel investors, licensing and commercialization companies, etc, who are interested in future energy solutions.

                    Full details Contact close