Please wait...

You selected inventions in category Green Energy

  • Pollution-free motorPollution-free motor
      Preview
      Description

      A new technology is out that has NOT gotten the attention it deserves! My name is Dan Williamson - manufacturing specialist. I am seeking financial backing to build (and start installing) a universal “fuel-free motor” that can replace all fossil fuel motors within our lifetimes!
      This motor exists and runs WITHOUT fuel!
      It's called a "Magnet Motor" and "YES!" they DO work!
      To see a simple version of this technology go to: http://www.youtube.com/watch?v=u5lXNpOnurw&feature=player_embedded

      Magnet motor advantages:
      1) Runs indefinitely - WITHOUT FUEL!
      2) Emits "Zero" air pollution.
      3) Very few moving parts.
      4) Mega-Torque - out the Kazoo!
      5) Runs under or over water.
      6) Needs no air to function.
      7) Needs no cooling system.
      8) Starting/running not affected by weather.
      9) It's the closest thing you'll get to "perpetual motion".
      10) Uses less room and weighs less than fossil fuel motors.

      Here’s the principal that makes it work (Try it yourself!):
      Use 2 similar magnets - .5" dia. x .5" thick

      1) Try PREVENTING the magnets from contacting as you move them closer together (by hand) - with ATTRACTING poles FACING each other.
      2) Try FORCING the magnets together - with OPPOSING poles FACING each other.
      3) Now try this using two magnets the size of hockey pucks!

      When we build a motor with properly spaced magnets and manually start it rotating - it continues to do so on its own - indefinitely!
      The simple fact is this: a smaller, tougher magnet motor CAN replace ANY/ALL fossil-fuel-burning motors - practically overnight - IF we choose to make it a priority!

      LET'S ALL WORK TOGETHER TO SAVE THE WORLD BY GETTING THIS TECHNOLOGY GOING...YESTERDAY!!

      MAGNETS = GREAT, CLEAN POWER!

      Full details Contact close
    • POWER GENERATION USING SOLAR ENERGYPOWER GENERATION USING SOLAR ENERGY
        Preview
        Description

        DEAR BUYER, I ANUP MAHESHWARI HAVE DONE B.E.MECHANICAL .I FILED
        PATENT ON 'POWER GENERATION USING SOLAR ENERGY' IN INDIA.I WAANT TO SELL PATENT .I AM SEARCHING COMPANY FOR THAT . I AM ALSO READY FOR AGREEMENT .WAITING FOR YOUR RESPONSE.

        THANK YOU

        Full details Contact close
      • Edible SpoonEdible Spoon
          Preview
          Description

          The Edible Spoon may be used to eat a variety of foods. It’s tasty, it’s healthy, it’s convenient, and it promotes a cleaner tomorrow. It’s 100% biodegradable. And 100% edible. And 100% good for you and the environment. This spoon comes in three flavors: Plain, Spicy and Sweet. Plain spoons may be used with any meal and are flavor-neutral. Spicy spoons can add extra zest to bland food or may be used to eat already spicy meals. Sweet spoons sweeten the food they are used to eat and may be used with foods – like cereal – that are already sweet. The spoons could be purchased in supermarkets for home use. They could also be served with meals at restaurants. US Patent:D632,046

          Full details Contact close
        • movement simulator by screwing mechanism (Designer : hadi omidinasab from I.R IRAN -Islamic Azad University Central Tehran Branch)movement simulator by screwing mechanism...
            Preview
            Description

            Movement simulator with screw mechanism is functionally an inventive system, which can simulate various movements in a 3-dimension space. This machine consists
            of 4 major parts:
            1. Main stand
            2. Screw stand
            3.screws
            4. Moving plate

            Full details Contact close
          • PS-XXX-X high hole density ventilation of domestic cement sack bag agriculture productsPS-XXX-X high hole density ventilation of...
              Preview
              Description

              Products, applications, advantages, high-holes-densities micro perforation, ventilation, mass product properties
              breathable, ventilation, filter cigarettes, tipping, packaging, plug wrap, refinish, thin paper, MYO, RYO, LIP
              booklet, bible, printing, magazine, promotion, flyers, newspaper, improved modified surface properties
              Kraft paper, sacks with low PE coating, single or triple layer multi wall sacks, tubers, bags for cement, plaster, maize, grain, pet food, granulate or powder
              gained air outlet during filling with high efficiency to keep packed products in specified barrier condition
              extending storages, live time or durability of certain goods and products
              decoration or gift paper with thin coating films
              PVC laminate, Vinyl, decoration, wall paper to eliminate condensation effects, enable gas exchanges, avoid rises of mildew or rottenness
              joint or corner Kraft paper tapes to avoid glue bubbles and enables material diffusion
              fleece bonding material, low plastic film layers for outdoor, under roof protection covering, wooden houses for oxygen exchanges
              technical textiles for oxygen or gas exchanges to avoid condensation processes
              breathable overalls, heavy duty, disposable work dresses, trousers, made of thin PE fleeces or others
              biotopes and prevention of water pollution
              leather or cloth inlets for comfortable non sweat wearing under wet, high humidity and tropical condition
              soap, deodorant, hygiene, beauty creams, baby care, other packaging products
              which needs smell suggestion for marketing indication and buying advantages
              vegetable, flowers or food with paper packaging replacements for oxygen or gas exchanges
              bread, rolls, fruit or food to improve freshness and aroma
              technical multi layer foils for industry, medical, bioengineering, filtration purposes surface modification, improved roughness
              micro filter, membranes, battery separation layers
              bio lab analytic, alcohol, liquid, blood filtration, clean room, agriculture, reduction or force growth rates

              Material treatment and micro perforation in cluster systems
              Web material as regenerated cellulose film, filter, cigarette, tipping, roll-your-own RYO, make-your own MYO, wall, decoration, transparent, coated, laminate, sack, bag or flexible packaging paper, bonded fabrics, spun bonded non-woven, food, fruit, medical, under roof house or agriculture vegetable covering, packs, technical textiles, fabrics, laminate with base weights 20 g/m2 up to 180 g/m2, thicknesses 10 up to 80 microns, up to 20 g/m2 LPDE coatings are perforate electro statically micro, or by laser with micro or macro holes for wide range of application purposes.

              Technology
              ELECTROSTATIC micro cluster perforation or other material treatment, based at micro discharging and sparking, plasma tunnel effects with gas atomic ionization in nano second time windows. The pores are normally statistical irregularly distributed in controlled size ranges from 0.5 up to 80 microns diameter and analogically, under LASER or MICRO or MACRO PERFORATION, arranged in diameter sizes from 60 up to 200 microns, at best non-inclined holes und holes rows of diverse arrangement comprehension. For the naked human eye invisible electrostatic micro perforations may be arranged in areas or zone bands with specific distances within its web. Controlled pore sizes in wide ranges from 0.5 up to 80 micron diameters by holes sequences up to 16 million pores per second and 0.1 up to 3 mill Joule discharge energy for each pore. That processes and power electronics are patent granted with DE10328937.

              Performance
              Arrangements of zones are usually carried out in width from 2 to 6 mm and pores density of 15 up to 250 pores per square cm whereas the perforation of areas results in pore densities of up to 5 million pores per m2 in surface-all-over design. Electrostatic perforations allows porosity levels from 80 up to 2500 Coresta Units (ml/min/2cm2 by 1000 Pa).

              Full details Contact close
            • OPSS-1 online permeability porosity sensor scanner measurementOPSS-1 online permeability porosity sensor...
                Preview
                Description

                Sophisticated multi functional inline permeability sensor scanner systems

                Patent pending DE10251610 and patent granted in China 200310104764. Stationary or scanner systems for high speed moving fabrics or sheet material to detects very precise and reproduce specified product properties, natural or micro perforated porosity levels during production. OPSS-1 OPRL-1 vision control systems are equipped with multiple IR, NIR, VIS monolithic spectral color sensors, precision line lasers, CCD image devices, DSP, ATMEL, INFINEON sensor internal controller, firmware, serial data link, scanning speeds 20 up to 500 mm per second, web widths up to 5000 mm, measuring gaps from 2.0 up to 5.0 mm, optical inline detection of permeability, porosity, spectral transmission, opacity, extinction, particle absorption, porosities ranges 80 up to 5000 C.U. respective from 50 down to 4 Gurley, position control of micro perforation lines with 0.1mm accuracy, 0.050 up to 200 microns pore diameter by up to 300 pores per cm2.

                With real time data determining of certain parameters, optical transmission, spectral grades, porosity integrals, envelope curves, internal calculated measuring values. Thus direct with close loops and feedback to power electronics of fabrics treatment units. Micro perforation or other treatment system makes it possible to compensate any changes in web treatment parameters and their partial locations so that each jumbo roll as well single, twin or quad bobbin sets can be produced quantity and quality controlled without intermediate stops in order of ISO-9001, ISO-9002 certifications.

                Working principle and application
                Thus sophisticate, precise, liable, repeat accuracy, easy visualized, optical online measurement techniques archives perfect ways to control and convert pneumatic, fluid, gas, jet streams, static permeability, naturally porous grades, filtration levels, breathable or ventilation effects. Their conditions can be easily met by using optical transmission technology thanks to described processing in full online stationary or scanning control units, extremely small pore dimensions, high fabric speeds up to 1000 meters per minute by high repetition rates.

                That completely independent from base material properties as consistency, coloring, density, formation, pin holes, smoothness, stretching, shrinking, brightness, opacity, spectral property, gauging thickness weight, moisture content and other known influences. Optical inline OPSS-1 porosity sensor scanning systems for permeability cluster control at electrostatic or laser micro perforation machines, with multiple color sensor head, spectral intensity, DSP, FPGA, CCD, one precise line laser, position, material finger print detection, VIS wavelength, touch less measure of opacity, defects, inspection, combines controller internal firm and further PC process software. Uses for filter, tipping, cigarette, booklet, packaging, magazine, newspaper, media, bible, wall, decoration, Kraft, sack, filter, paper, coffee, tea, food, co-extrusion, foil, film, agriculture, cement, maize, rise, pet, domestic or other fast moving web material.

                Full details Contact close
              • ODSTM-1 in-situ dyne surface tension wettability measurement at fast moving plastic films and foilsODSTM-1 in-situ dyne surface tension wettability...
                  Preview
                  Description

                  Method and device for online tough less surface tension control ODSTM-1 in DE19543289 by which the fast moving substrate through the measuring gap. It is transmitted with a chromatic beam and spectral selected light source were two optical channels are displaced and polarized by 90 degree to each other. Both optical axles are precise and motor driven shift able in certain angles from 25 up to 65 degree. The spectral light photons, transmission, extinction, absorption grades are detectable by two optical CCD imagine vision devices, integrated into the sensor case on other side of the substrate.

                  Material condition
                  At high speed moving substrates means plastic foil, flexible, film, laminate, coating, bonding, labeling, co-extrusion, BOPP, LDPE, LLDPE, HDPE, MDPE, MAS, MOH, MEV, PET, FEP, PP, PE, PS, PO, EVA, PTFE, PVC, PTFE, Vinyl, Polyester, wrapping, self-adhesive tape, high strength, cross laminated, adhesive coated films, reflective or magnetic sheeting, automotive tape products, inkjet, heat sealing, security, pressure sensitive tapes for entertainment or building industry, masking or printable plastic films, polycarbonate, acrylic, extruded or polished cellulose, optical grade polycarbonate, sheets for IR or laser protection, filter sheet, imaging, capacitors, bi-oriented polystyrene sheet, multilayer co-extruded film, PVC, PETG, polyimide, tear tapes for aerospace, inner covering in aircrafts, automotive, medical, bioengineering, renewable, agriculture, marine, household, commercial, domestic, construction, high-porous membranes for uses in alkaline lithium ion batteries, fuel cells, filtration equipment. By gauges 10-500 microns, fabric widths up to 10000 mm and web speeds up to 18 m/s.

                  Optical properties and quality control
                  Material specific wavelength selection 1200 up to 1800 nm, material specific finger prints, molecular spectral properties, transmission, optical angle scanning, ultra low level stray scatter light detection, polarization, slot diaphragms, transverse displacements control the light beams along and far from the optical X and Y axes. The results are extreme scattering, diffraction, NIR, IR, stray light photons generation into the layer areas at both sides of the moving substrate.

                  Their reflected and transmitted light intensities enables the determination by defined formulas and data matrixes the surface tension values in ranges from 28 up to 62 mN/m or dynes which are direct associate and bond to real static values for statistical quality control (SQC).

                  And this entirely independent of the material specific influences as like surface consistency, thickness, density, weight, opacity, coherence, filling, stretching, shrinkage, structure, co-extrusion, polar grouping, temperature, intrinsic motivation or viscosity, hydrophobia, hydrophilic molecules, hydrogen, moisture, water steam proof, bi-layer, polymer, patterning, nanostructure, irradiation, isotopic, catalyst, coherence, absorption, photo mask effect, radiation, resonance bands, Raman, electron spectroscopy for chemical analysis ASTM or ATR method, property, acoustic photonic liquid effects, pre material treatment as corona, plasma jet, flam treatment.

                  Full details Contact close
                • NEW CYCLE DRIVING MECHANISMNEW CYCLE DRIVING MECHANISM
                    Preview
                    Description

                    WOULD YOU LIKE TO HAVE PATENT?

                    GREAT BUSINESS OPPORTUNITY FOR CYCLE MANUFACTURERS AROUND THE WORLD

                    I HAVE DEVELOPED NEW DRIVING MECHANISM FOR BICYCLE/RICKSHAW HAVING FOLLOWING ADVANTAGES OVER CONVENTIONAL SYSTEM.

                    I AM READY TO SELL THE INVENTION ALONG WITH PATENT RIGHTS / COMMERCIAL DEVELOPMENT & SELLING RIGHTS ON MUTUALLY AGREED TERMS & CONDITIONS.

                    IN CASE YOUR COMPANY IS INTERESTED, PL. CONTACT ME. MY MOBILE NO. IS +919424140739.


                    ADVANTAGES OF NEW DRIVING MECHANISM
                    BY- R. P. NAIK

                    1. Both legs can drive simultaneously: Due to independent nature of driving both of the legs can be utilised for driving simultaneously whenever required. This will help in dead start or accelerating with high load at step gradients or rough tar rain etc.

                    2. Continuous driving torque: The driving force on the rear wheel (s) will be a continuous one. As soon as a leg finishes its driving stroke the other leg will start its driving stroke and hence virtually there will be no time of zero torque.

                    3. More force than driver’s weight can be applied without fatigue: The backrest provided will give support to driver in such a way that by utilizing reaction from backrest, the driver can put on force more than his own weight whenever required.

                    4. No stress in portion above the waist: Due to same backrest, there will be no stress developed above the waist and back pen and hand tension will be eliminated.

                    5. More angle turned by thighs & knees ensure more force available when required: Due to position of seat and paddle, the angle turned through by thigh and knee for any stroke of driving will be more than corresponding angle in case of ordinary cycle (rickshaw) hence there will be more work done available per driving stroke of the paddle.

                    6. Crippled persons can use their able leg: The same system of driving can be utilised for handicapped person’s tricycles. In these, the handicapped person can use his able leg along with his hand for driving the tricycle. If the amputation of a leg is below the knee; than he can use even his stump as well as his able leg for driving with the help of suitable padding and paddle modification.

                    7. Easy adaptability for existing manufacturers: Once this system proves its utility and is accepted for increased speed /load carrying capacity of rickshaw, the existing cycles or rickshaw manufactures can easily convert to this design without altering many of their facilities.

                    8. Gear arrangements: Suitable gear arrangements will enhance speed / load carrying capabilities tremendously.




                    I AM READY TO SELL THE INVENTION ALONG WITH PATENT RIGHTS / COMMERCIAL DEVELOPMENT & SELLING RIGHTS ON MUTUALLY AGREED TERMS & CONDITIONS.

                    IN CASE YOUR COMPANY IS INTERESTED, PL. CONTACT ME.

                    FOR ADVANTAGES OF NEW SYSTEM PLEASE CLICK DOCUMENT NO. 13731738 ON "scribd.com". [CYCLE MANUFACTURERS INTERESTED IN JOINT PATENTING WE CAN REAP BENIFITS TOGETHER].

                    Full details Contact close