Please wait...

You selected inventions in category Green Energy

  • SEA WAVE POWER GENERATIONSEA WAVE POWER GENERATION
      Preview
      Description

      EAR SIR .I ANUP R. MAHESHWARI HAVE DONE B.E.MECHANICAL .I FILED PATENT ON SEA WAVE POWER GENERATION I WANT TO SELL PATENT .FOR FURTHER DETAIL PLEASE CONTACT ME ON 1979.anup@gmail.com . I AM WAITING FOR YOUR RESPONSE.
      THANK YOU

      Full details Contact close
    • Soap dishSoap dish
        Preview
        Description

        The Banus Soap Holder, made specially for the interior part of the bathroom sink, maintains the soap dry and clean. By hooking it in the overflow holes of the sink, it saves space in the countertop and does not require installation. It is perfect for children and handicapped people. Lessens, the friction with the soap and therefore both the soap holder and the soap remain clean. Made in brass, it carries a lifetime warranty

        Full details Contact close
      • Low-cost Solar Concentrator SystemLow-cost Solar Concentrator System
          Preview
          Description

          This novel solar concentrator captures and redirects sunlight through a coupled concentration chamber to small PV cells. It has low profile, is suited to low cost manufacture, and can be applied to roof top systems or ground mounted systems.

          Traditional solar photovoltaic (PV) concentrators tend to be bulky and expensive to produce requiring precision lenses to capture and concentrate the light onto small targets. Some of the designs covered by this patent family use small tracking mirrors coupled to a concentration chamber that guides the sunlight to a reduced area solar cell. Other configurations also described in this patent family exploit the properties of total internal reflection using cavities in solid materials to capture and channel light in the concentration chamber. The resulting designs therefore have much lower profile than traditional systems and are easy to fabricate.

          The market for solar PV concentrators is growing rapidly. According to the Concentrated Photovoltaics Industry Report 2010, the US market is expected to grow at a CAGR of 75% over the next five years to 2015 (http://www.energysavingweekly.com/cpv-installations-in-the-usa-set-to-grow-at-a-cagr-of-75-in-the-next-five-years/). Several companies are gearing up for this growing market. One such company is Morgan Solar (www.morgansolar.com) who are seeking to commercialize products using some of the principles disclosed in these patents. Others in the industry include Solfocus (www.solfocus.com), and Concentrix (www.concentrix-solar.de) whose systems would likely be more bulky than designs disclosed in these patents.

          The entire patent family is for sale, which includes pending patents in numerous countries including the US and Canada, and granted patents in Singapore and South Africa.

          Full details Contact close
        • Wind turbine in a combined nozzle with solar cellsWind turbine in a combined nozzle with solar cells
            Preview
            Description

            The wind turbine in a combined nozzle is a new electric power plant for profitable electricity production. Its basic purpose(under the same conditions) is to generate 3 to 4 times more electricity than the present-day standard turbines do (without the nozzle) with the same rotor diameter and the same height.The combined nozzle concentrates, accelerates and controls free air streaming and with the cube of the wind speed increases the turbine power and its profitability severalfold. If the solar photovoltaic cells are mounted on the joint rotary mechanism, the combined system thus obtained can economically yield electricity from wind and the sun.
            Advantages:The new Wind Turbine in a Combined Nozzle with Solar Cells can yield four times more clean, cheap and renewable electric power.
            Intended use: The new wind turbines may be incorporated into an electric power system or operate independently. They can be small (up to 15 kW), medium-sized (up to 250 kW) and large (up to 2.5 MW)

            Full details Contact close
          • DC circuits FilterDC circuits Filter
              Preview
              Description

              DC current Filter (DCF) designed for all circuits of devices if in it there is AC to DC conversion or/and filtration-smoothing or need a lightning/surge defence like an Energy Saving Lamps (ESL), TV, Video, Computer, Charger, Electronical Transformers, Welding Equipment, space-air-marine-submarine vehicles onboard systems, cars trucks, trams, trolleybuses, underground trains, similar
              Results of measuring in self-made model:
              1 If zero of measurements – diode rectifier exit – smoothing is 75-80 dB, radiofrequency noise reduction is 70-75 dB, efficiency 98-99%. Like best microchip based filters. But if current of the load less 25-50% of normal – decrease of only smoothing – will be pulsations in exit. If load more then 150-200%-more% of normal – overheat (and burn – depends on the wire insulation) of the DCF.
              2 DCF can correct Power Coefficient (PCC function) in range +/- 60 degree with out additional device. If the load less then 10000 Watt – it should be corrected but not must be because it is very expensive and the economy of 11% of primary energy (110/220 Volts 50/60 Hertz or another) – possible these lost and additional influence to power greed due to very expensive PCC units. Cheapest in the World solution.
              3 Temperature range of DCF is in limits of Kuri temperature of ferromagnetic core of the DCF. And ionizing radiation resistance/strong ness like at a the used wire insulation – the World best lifetime and reliability.
              4 Economy size and weight 25-50% of similar efficiency LC filter, whorster then best microchip based impulse kind filters in 10-20%. Slightly simpler and faster production of any device due to DCF more simple common design of the side of board/it’s wiring.
              5 In circuit 12Volt 6 Amperes the DCF defence load against 4 mikroFarade 330-340 Volt capacitor any polarity discharges every 0.5 seconds or rarely. Against any surge like a lightning over voltage in now days designs it is impossible with out very expensive ultra fast diode and varistors and high voltage capacitor jointed and displaced especially.
              6 DCF can be produced at any industrial designed for a transformers/a bobbins/a magnetic relay producing robotized line as an element or unit or small board or similar. DCF looks like a transformer but must be connected only DC-pulsing input – wire 1+ and 2- and exit wire 3+ and 4-, wire 5 is control – for decrease smoothing if necessary to be avoided limitation (8-9 times of normal) of start current shock – there is the limitation if no any current in wire 5 (polarity is +) to wire 2. I don’t know where is necessary the limitation avoiding. The limitation is useless if there is short circuit after DCF a fuse necessary.
              7 With 2 diodes 2 parallel DCF or 1 DCF in diagonal of 4 diode rectangle rectifier with AC input and AC output (as 2 polar kind unit) can work in any AC systems but there is not money kind voices for similar solution. Now days LC anti noise filters for an industrial AC systems really rare because just need not so deep smoothing or noise rejection – there is defence of electronical and relay control units and other devices are not miss work due to a noise. Or it is enough ordinary anti over voltage dischargers.
              8 No any active elements inside. Only core and wire and capacitors inside. In my model all less 55-60 volts by description.

              Full details Contact close
            • New sources energyNew sources energy
                Preview
                Description

                Renewable energy, new energy sources.
                Use gravity (gravity), geothermal effect (warm ground), solar energy, power
                flows of rivers, the wind.
                Maximum security.
                For the staff, (for maintenance), environment (ecology), for the state (strategic
                security).
                High efficiency. High power (from 1KVt to 1000 MVt and more). Universal
                application.
                The minimum cost price of electricity.
                1 - power converter steam (air), low pressure. Patent RF 2215183.
                When small amounts has enormous potential power. No competition. Able to replace nuclear
                power, hydropower, thermal power plants.
                2 - inverter air flow (of water). Patent RF 2219369.
                more efficient than
                traditional turbines. When used in water can replace the hydroelectric power
                station.
                3 - know-how. Super battery. The new principle of accumulation of electricity.
                Able to replace hundreds of conventional batteries.

                Full details Contact close
              • Automatic sensor LED lightingAutomatic sensor LED lighting
                  Preview
                  Description

                  The traditional pyroelectric sensor (or a sound sensor) and the combination of light source, without reserve electric wire, place the product directly on the lamp and turn on the power. When the LED lights to the sound or body heat sensor, the automatic lighting (sensing distance of about 6-7 meters, induction angle 90-120 degrees) away from the time when the sound or heat. LED lights automatically turn off delay of 20-30 seconds(may adjust for 5-60 seconds). This product is suitable for supermarket, stairways, corridors, entrance, kitchen, toilet, warehouse, garage, balcony and other places. The power source according to the UL modular design, the light bulb weight only 195 grams, the light bulb diameter is 75mm, the length is 120mm. Power supply AC: 85V-265V, Universal worldwide voltage, 9 watts of power, equivalent to 90 watts of ordinary light bulb brightness. More than 5 years of life, all products made with environmentally friendly materials(ROHS) in line with energy saving and environmental protection requirements. Simple shell shape and bright, fully show the beauty of elegance.

                  Full details Contact close
                • LED night lightAutomotocycle The X-shaped Brake LightLED night lightAutomotocycle The X-shaped Brake...
                    Preview
                    Description

                    Bau-Yi's X-shaped Brake Light with LED lamps greatly improve the warning luminance,enhance the safe driving,and avoid a rear-end collision. To protect the environment,the X-shaped brake lights not only effectively save theenergy,but also adequately reduce the discharge of carbonate(CO2).

                    When a breakdown of the motorcycle occurs,there is an emergency button to make the lights blink at once and the buzzr simultaneously go off into sound. It can duly provide a warning effect to protect the drivers.

                    Full details Contact close