Please wait...

You selected inventions in category Mechanical Engineering

  • NGW Series Planetary Gear ReducerNGW Series Planetary Gear Reducer
      Preview
      Description

      Overview
      NGW series reducer is an involute spur planetary gear reducer, which adopts advanced technology and novel structure. It is mainly used in metallurgy, mining, cement, lifting, transportation, textile, dyeing, chemical, light industry, etc.

      Features
      1, Light weight, small size: compared with the common cylindrical gear reducer, its weight is reduced by more than 1/2, the volume can be reduced by 1/2-1/3
      2, High transmission efficiency: with single-stage transmission efficiency of 0.97, double-stage up to 0.94, three-stage up to 0.9
      3, Wide transmitted power range: from 1 kilowatt to 1300 kilowatts
      4, Using hard tooth surface which has long service life and wide applicability

      Applicable conditions
      1. The maximum speed of the high-speed shaft does not exceed 1500 rpm
      2, The peripheral speed of the gear does not exceed 10 meters / second
      3, The working environment temperature is -40 ~ 45c
      4, Both forward and backward rotating direction are available.
      The company can also provide ZDY (ZLY, ZSY), DBY (DCY) series crane reducer, NGW (NGW-S, NGW-L), NAD (NBD, NCD), NAF (NBF, NCF), TX series planetary gear reducer, BW (BWY, BL, BLY), X series cycloid reducer, ZJ, ZJY series shaft-mounted reducer, TCJ series gear reducer, and TDY75, JBT (YBT, WBT, YDT, JDT)φ200 -φ1000 motorized pulley of oil-cooled, oil-immersed, exterior-mounted and rubber-coated.

      Full details Contact close
    • Vehicle Tire Track SystemVehicle Tire Track System
        Preview
        Description

        The vehicle tire system is designed to provide all non-SUV vehicles (sedans) with the required equipment to make them function as an all-wheel-drive through all soft lands, whether sand or snow. The apparatus wii generate a continuous solid tracks that protect the tires from getting into the soft land, and then hinder the vehicle from moving. For further details, the patent could be accessed at https://patents.google.com/patent/US9796434B2/en?oq=Tire+vehicle+track+system

        Full details Contact close
      • The Water Engine Pull-to-Start Double VortexEnergy Flywheel GeneratorThe Water Engine Pull-to-Start Double...
          Preview
          Description

          The Water Engine is to be the world's first patented mass market perpetual motion machine. It uses the water increasing speed of two vortices to re-circulate water which is then run through the patented centrifugal design Vortex Turbines to both power the machine and spin electricity generators. The embodiment of the concept for which I am seeking assistance is a small water heater tank sized version which is designed to be indoors and connected to The Grid in order to take advantage of Florida's Net Metering Law which allows customers to sell electricity back to the utility and earn up to $144,000 dollars a month.

          Full details Contact close
        • Screw conveyoScrew conveyo
            Preview
            Description

            Screw conveyor is a kind of machinery with motor to drive screw rotation and to push the material in order to achieve the delivery. It can complete horizontal, inclined or vertical transportation, with the advantages of simple structure, small cross-sectional area, good sealing, easy operation and maintenance, convenient to seal and transport and so on. According to the transportation form, Screw conveyor is divided into shaft screw conveyor and shaftless screw conveyor, meanwhile, according to the appearance is divided into U-screw conveyor and tubular screw conveyor. Screw conveyor is widely used in food industry, building materials industry, chemical industry, machinery manufacturing, transportation and other sectors of the national economy.
            Shenyang Juli Mechanical Design Co., Ltd. adopts advanced technology, such as non-equal-pitch helix axis blades and the gradual transition from the beginning to the end of the blade. The blade is made from high wear-resistant, corrosion-resistant materials, with features of smooth feeding, high strength, good anti-abrasion, etc. The thickness of the spiral blade can be increased to enhance blade strength and extend the service life. Adding knockout angle steel in the center of the outlet makes the material flowing more fluid and improves the stress state of the blade to prevent the blade from open welding or bending on the tip, to avoid the opposite blade’s breakage due to fatigue failure and make sure the coal column level is basically uniform decline without blocking.
            Shenyang Juli Mechanical Design Co., Ltd. has the supply of 6m coke oven supporting spiral feeder, 7m coke oven supporting spiral feeder and 7.63 m coke oven supporting spiral feeder, as well as offering customized services.

            Full details Contact close
          • Intelligent system for detecting tooth decay using piezo vibration and 100 accuracyIntelligent system for detecting tooth decay...
              Preview
              Description

              Always Special attention has been paid to the accurate diagnosis of dental caries in dentistry.
              To detect dental caries At the occlusal levels via The perfect mirror And at interdental levels The use of radiographs of Bytewing .
              addition to the cost of Preparing radiographs , It expands the patient to x-rays, which itself has multiple complications.
              Different radiographic systems are one of the main diagnostic tools in dentistry.
              As a result of an increase in the number of illnesses resulting from laser imaging that is the result of this radiation , And the increase in radiation damage to humans.
              The best way to detect with 100% accuracy And without zero percentages, To improve the quality of decay detection and Renounce all the problems listed , Decided to design got this device.

              The complications and problems of radiographic systems:

              **Diseases of the skin and cancer caused by x-rays for dentists and patients
              **Physical complications for pregnant women in embryos
              **High cost in the preparation and maintenance of radiographic equipment
              **Lack of accurate diagnosis of decay (detection of up to 60%) Or the separation of amalgam from the tooth (detecting up to 25%) in the restorative tooth By radiography devices
              **Detection of decay (detection 0%) or separation of amalgam substance from the tooth in restorative tooth by oral sensors

              ** Specific objectives of the project

              1. Record the waves from healthy teeth
              2. Record the waves from the teeth with 0.5 mm cavities
              3. Record waves from teeth with 1 mm cavities
              4. Record waves from 1.5 mm cavities
              5. Record waves from teeth with 2 mm cavities
              6. Compare the two primitive groups together
              7. Record radiographs of sample teeth
              8. Review the synchronization of radiographic images with the designed model

              ** Applied Schemes

              • Possibility of examining tooth decay in pregnant women and the elderly
              • Facilitating the examination of dental caries and studying the separation of amalgam from the tooth in restored teeth ,dont need to go to radiographic centers And exposure to laser radiation (Notably, the most advanced X-ray devices are not able to do it)
              • High accuracy of detection than radiography devices up to 100% accuracy of detection
              • Cheaper prices, so all dentists will be able to buy this device
              • Because of its low cost of service, it does not cost much, and it's a welfare for patients
              • Avoiding time to go to the radiography clinic and returning to the dentist's office.

              Teeth are randomly divided into 5 groups of 20 teeth. In groups 1-4, cavities at 0.5, 1, 1.5 and 2 depths in the teeth will be created as a decay model. In the fifth group, no cavity will be created. By contacting the ultrasonic probe with the teeth, the waves received by the detector will be recorded.




              The next steps are as follows:
              1- 3D modeling of the device in Solidworkes 2016 Software
              2. Load dynamic forces and dynamic analysis with MC Adams software
              3. The loading forces of motion and vibration analysis software ANSYS 17.1
              4. Vibration testing of teeth with ME Scope software for comparison with modeling analysis
              Next step The teeth are parallel radiographs and the result will be compared with the model. Statistical analysis of data By one-agent variance analysis and The appropriate follow-up is used to compare two-dimensional groups in groups.

              At this point, our data will be ready for the device library And the device becomes the program.

              The cost of the Intelligent system for detecting tooth decay using piezo vibration and 100% accuracy:

              **Making the original model Body with a beautiful look:2500$
              **Modal and harmonic vibration testing on 200 human tooth samples ( We will receive from the bank of dentistry of medicin university):19000$
              **Build a humanoid robot to move and sit on a dental unit To view system performance :4000$

              Total:65000$

              Full details Contact close
            • Intelligent systems alternative to anesthetic treatment of dental and medical procedures Without the injection of any Anesthetic and Only using a special fixture For surgery and Dental surgeryIntelligent systems alternative to anesthetic...
                Preview
                Description

                ** Specific objectives of the project:

                • Non-use of anesthetics in dentistry and in the next step for surgery of human organs
                • Measuring the actual rate of pain and fixing it and applying anti-acne in the form of nano-electric shocks

                ** Applied Schemes:

                • Possibility of dental surgery without any pain or stress that is present in all patients referred to the doctor)
                Facilitate dental operations Because of no pain (In most cases, despite the numbness in the intensity is palpable)
                • Not having any side effects for humans in the short or long term
                • Persuading people To provide health for oral and dental health and Increasing social health
                • No pain will be touched by the patient And will not touch any sensation of electrical shock

                Full details Contact close
              • Intelligent Endo Dental Surgical Robot with dental radiography system and webcam and injection of anesthetic plus dental decay Detection Portable intelligent devices via The piezoelectric system with 100% accuracy without any complicationsIntelligent Endo Dental Surgical Robot with...
                  Preview
                  Description

                  ►►AIM OF THE PROJECT
                  Dentistry is the branch of medicine that requires a lot of power for a dentist. To
                  enhance the quality of dental services and avoid all the problems mentioned and For ease
                  of operation such as (Anesthetic infusion, X-RAY Photography, Time Management and
                  milling tooth and …) we have decided to design this robot to earn these benefits:
                  1- Avoid touch the Dental ando system to lips and tongue
                  2- Tooth milling operations by robot
                  3- Dental radiography by robot
                  4- Video record via robot system in 5MP resolution
                  5- Anesthetic infusion To the target by robot
                  6- Time management
                  7- Reduce of the extra costs
                  8- to avoid being exposed to infectious agents such as practitioners (HCV, HBV
                  «hepatitis B, C», and bacterial and fungal infections)
                  9- Prevention of Musculoskeletal Disorders as "back pain, wrist pain, headaches,
                  shoulder pain, back pain, neck pain"
                  10- Avoid visual fatigue and premature fatigue.
                  11- Avoid exposure to noise pollution
                  12- Abatement of exposure to the rays' ionizing or non-ionizing "
                  13- prevent skin allergy, allergy
                  14- avoid the risks and hazards of chemicals such as mercury dental amalgams,
                  resins, sealers and ...
                  15- Dental decay Detection intelligent devices via the piezoelectric system with 100%
                  accuracy without any complications
                  16- In deprived regions by a dentist From anywhere in the world Controlled of the
                  Internet (Including the poor and disadvantaged countries that Not respected The
                  oral health ،Peoples can Repair the Teeth)

                  **Intelligent dental robot video:
                  https://www.youtube.com/watch?v=Jl2CZDfAeow
                  **Intelligent dental robot video:
                  https://www.youtube.com/watch?v=Jl2CZDfAeow

                  ►if your company be Enthusiastic to buy Technology and
                  technical knowledge of world first intelligent dental robot
                  ,Respectfully we are ready to cooperate and send more details
                  and movie of this robot
                  Special Regards
                  Aslan Khani Sheykh Rajab

                  Full details Contact close
                • Personal transferable alarm system prevents theft and forgetfulnessPersonal transferable alarm system prevents theft...
                    Preview
                    Description

                    For pocketbooks,briefcases,backpacks,wallets, coats,cellphones,bicycles, Pets children etc.
                    This small device will remind you if you forget your pocketbook etc. place the alarm exp. in pocketbook and on yourself either as a bracelet or in your pocket, when you walk out of range, your pocketbooks alarm will go off,as well as the one you have on you! For an upgrade you can have GPS added as well to all the above systems. If someone takes your pocketbook the alarm will go off!!, I'm sure the thief will skip that idea ,as it will get everyone's attention! If your shopping in the store and are distracted and someone grabs your bag the alarm will go off, or if they reach in your bag,the alarm will sound. If your home and your child goes in your pocketbook the alarm will sound and this will prevent your prescriptions from being ingested. ,etc. bicycle alarm comes with a magnet that attached to the bottom frame,if you run in a store to shop and someone goes to take your bike, the alarm on the bike will go off ,as well as the one on you!!! You can go in your pocketbook uninterrupted !!! If your child goes out of range, your alarm will go off!!! No more lost,stolen or forgotten personal items!!! ( peace of mind! )

                    Full details Contact close