Please wait...

You selected inventions in category Mechanical Engineering

  • LawntilizerLawntilizer

      The lawnmower meets the the fertilizer spreader now name The Lawntilizer. The function of the Lawntilizer has a few components for its function: spinner assembly with flow divider, controller, rotary spreader box. The fertilizer container is a clear box to store fertilizer. A steel rod will be inside container so it can be mounted on the handle bar of lawnmower. The rod can be adjusted to any mower with brass fittings. There is a controller on lawnmower handlebar for easy access to control the flow of fertilizer. It has a flap at bottom to control the flow of fertilizer as far as not all over your pants/shoes. When you have to go over an already fertilize grass you can flip switch to shut off.

      Full details Contact close
    • Intelligent Dental Surgical RobotIntelligent Dental Surgical Robot

        Dentistry is the branch of medicine that requires a lot of power for a dentist. To enhance the quality of dental services and avoid all the problems mentioned and For ease of operation such as (Anesthetic infusion, X-RAY Photography, Time Management and milling tooth and …) we have decided to design this robot to earn these benefits:
        1- Avoid touch the Dental ando system to lips and tongue
        2- Tooth milling operations by robot
        3- Dental radiography by robot
        4- Video record via robot system in 5MP resolution
        5- Anesthetic infusion To the target by robot

        6- Time management
        7- Reduce of the extra costs
        8- to avoid being exposed to infectious agents such as practitioners (HCV, HBV «hepatitis B, C», and bacterial and fungal infections)
        9- Prevention of Musculoskeletal Disorders as "back pain, wrist pain, headaches, shoulder pain, back pain, neck pain"
        10- Avoid visual fatigue and premature fatigue.
        11- Avoid exposure to noise pollution
        12- Abatement of exposure to the rays' ionizing or non-ionizing "
        13- prevent skin allergy, allergy
        14- avoid the risks and hazards of chemicals such as mercury dental amalgams, resins, sealers and ...
        15- Dental decay Detection intelligent devices via the piezoelectric system with 100% accuracy without any complications
        16- In deprived regions by a dentist From anywhere in the world Controlled of the Internet (Including the poor and disadvantaged countries that Not respected The oral health ،Peoples can Repair the Teeth)
        ►► GENERAL INFORMATION  Radiographic imaging (X-RAY) by robots 150DPI
         Film record via robot camera with (800*600) resolution
         Anesthetic injected into the mouth Target with adjusted 0.02mm
         Tooth operations intelligent robot with adjusted 0.02 mm

         Prevent wasted time (the robot operating time reduces to 15% )
         Prevent exposure to infectious agents such as (HCV, HBV «hepatitis B, C», and bacterial and fungal infections), 90% of patients will reduce.
         Prevent musculoskeletal disorders in dentists' pain, ankle pain, headaches, shoulder pain, back pain, neck pain, " 100% prevent this disease ".
         Prevent vision fatigue and premature fatigue ,100% prevent this disease.
         Avoid exposure to noise by up to 70% reduced.
         Prevent exposure to radiation as "ionizing and non-ionizing " 100% prevent this disease"
         Prevent skin irritation, allergies and the risk of AIDS and hepatitis, with this method, 100% of those diseases can be prevented.
         Abatement of hazards, chemical hazards, such as dental mercury amalgam, resins, sealers, etc. With this method, 70% of these illnesses can be prevented.
         Prevent physician fatigue and adverse events with up to 100% of this procedure is to prevent these diseases.
         The remote control system via Internet.
         Dental decay Detection Portable intelligent devices via The piezoelectric system with 100% accuracy without any complications

        ►►Used Technologies: Buhler Stepper motor ▬ DV camera for image process ▬ computer brain interface control system majol ▬ 7" tablet for controlling system ▬ six degree joystick- Atmega256 microcontroller etc. ▬ ABS parts for Robot assembly ▬ Brushles motors ▬ 50 M ultrasonic Sensors ▬ plaxyglass elements ▬ micro cam via 50 DPI resolution ▬ LCD monitor5" ▬ SONCEB OZ stepper motor
        ►►Working Principle: Robot electrical system Is provided By a 24 volt 12 amp power adapter that is connected to AC power. Robot performance is explained briefly below:
        1- This robot that connected to the dental unit We Help into the patient's mouth
        2- Robots are fixed in the patient's mouth
        3- Via stepper motors controller and rotational base motor ,In terms of mechanism, imaging needed and video recorder and Anesthetic infusion ,teeth milling tools, selected location desired Dentist ,Is regulated by the dentist. 4- As needed by selecting any of the items and press the button to start the robot works
        5- When we got to the final stage of tooth ra

        Full details Contact close

          A regenerative suspension system comprises a coil spring biasedly coupling a suspended portion of the vehicle to an unsuspended portion of said vehicle. There is provided a magneto-motive damping system arranged inside a housing axially coupled to the coil spring and having a linear generator for transforming the linear displacement into electrical energy and simultaneously damping the vertical acceleration. The regenerative suspension system is further provided with a fluid damping system arranged inside the housing and configured to operate at or above a threshold vertical acceleration and is operatively coupled to the magneto-motive damping system. The fluid damping system is provided with a regulator for varying the fluid pressure within the fluid damping system as a function of vertical acceleration acting on the unsuspended portion of the vehicle.

          Full details Contact close
        • Energy Storage Expandable Composite TanksEnergy Storage Expandable Composite Tanks

            QFX001 holds a patent for a new method to create a super light weight composite to be used for gas storage tanks including energy storage, gas cylinders, air compressors, safety tanks(anti explosion garbage cans) and alternative energy vehicle tanks.

            Full details Contact close
          • Energy-Efficient Chain-Drive Sprocket Reciprocating PumpEnergy-Efficient Chain-Drive Sprocket...

              National Patents: 201120047489.x;201120145598.5
              This type of reciprocating pump uses sprocket-and-chain structure to drive piston, which removes the limitation of crank-connecting mechanism. On the one hand, the motion of piston is constant and consumes low energy. On the other hand, the piston stroke is long and the relevant valves switch unfrequently, so valves' service lives are long. Besides, it's easy to upsize.
              Compared with the existing pumps, an energy-efficient chain-drive sprocket reciprocating pump has high efficiency, high head, large flow and strong adaptability to adjust flow and head at will. The output power automatically adjusts with different working conditions, and the energy-saving effect is remarkable. It is anti-corrosive and anti-abrasive with long service life.
              The spcifications are classified by output power (flow×head) and maximum head. Within the allowed maximum head, flow and head can be adjusted freely and continuously. So its spcifications are largely reduced, and each specification might cover a dozen or even dozens of specifications of impeller pump. Abviously, its production and use become more convenient.
              The Application and Derivatives of the energy-efficient chain-drive sprocket reciprocating pump:
              a. High-lift pump
              It can product high-head pump to make up for the low-head impeller pump. It can be used in various industries. Some representative high-head pumps are:
              Waterflood pump and slurry pump in oil industry; deep mine drainage pump in coal industry; lift pump in large irrigation and drainage pumping station, etc.
              b. Chemical pump
              As the impeller pump has poor anti-corrosion quality, the service life of a chemical pump is short. At present, the market is crying out for chemical pump with large flow, high head, and long service life.
              The anti-corrosion materials like stainless steel can be used to produce chain-drive sprocket reciprocating pump, or do perservative treatment to produce chemical pump for transporting all kinds of corrosive mediums. It has a huge market.
              c. Other derivatives
              Based on the above advantages of reciprocating pump, the following derivatives can be produced:
              Secondary water-supply system in high buildings; minipumper; the ship drive system; high pressure gas-compressor.

              Full details Contact close
            • Ceramic - ceramic implant with Titanium SurfaceCeramic - ceramic implant with Titanium Surface

                Worldwide unique nanotechnological coating process for manufacturing ceramic implants with a pure titanium surface - with the potential to create new Benchmark in medical Engineering.

                Full details Contact close
              • Imploturbocompressor -  Coming from Macro-Flow to Micro-Flow by Implossion - Excellence in Design 1 Moving Part System - 1 Compression StepImploturbocompressor - Coming from Macro-Flow to...


                  Coming from Macro-Flow to Micro-Flow by Implossion.

                  *-“Excellence in Design" because is only one moving part. Only one unique compression step. In flow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).

                  Presenting one of the many diferents examples, could specifically be this same invention applied in pair in every bar end, similar to what would be a turbine reaction or turbocompressor, and making the best profit of a exhaust gas dynamic flow, compressing a new air entrance and therefore falling into the technical field of the reaction turbines. This of course, considerating materials that are resistant to the high temperatures such as the ceramics ones. And furthermore this invention approaches more the combustion point and therefore also more to the gases expansion point, in order to search a higher expanding dynamic strength. It could, for example, be presented into an inter dynamic rotor system ("Gear Turbine"aplication), supported internally and in a rotating system. And likewise being able to activate a new concept of dynamic turbine by pushing gearing, and likewise, creating a new technical field.
                  Or can be in a more simple way by means of the system of this same invention applied to the bar end, but without a movement of interaction with the rotor, only the rotary dynamics in a static point for any type of mechanical work such as a dynamo in order to generate electricity through the dynamic strength of a flow when it is rotating at the moment it receives it, just like a pelton well do.

                  And when the flow that is received and that is intended to be used at best, must no necessarily by a exhausting or rejection gas, but must be a dynamic passing gas or liquid flow with the only intention to count it or to measure it. This could be possible at the passing and interacting period when it passes inside its simple mechanism. This can be in any point of the flow trajectory.

                  In case the flow that is received is a water falling by gravity, and a dynamo is placed on the rotary bar, the Imploturbocompressor can profit an be obtained by generating? electricity such as obtained by the pelton well, like I say before.

                  Or only receive the liquid flow, in order to measure its passage with a counter placed on the bar, because when this flow passes through the simple mechanism of a rotating wing made of only one piece it interacts within the implocavities system. And this flow can be air wind, with the diference of can have an horizontal position, and have wind from all the sides and all the time. The aforementioned information about this invention refers to technical applications, such as a dynamic flow receiver. (whether being gas or liquid).

                  Connecting the free end of the bar of this invention to a power plant (manual, electrical, mechanical, or combusting, etc...), there will be available a capacity and a position in order to generate the flow dynamics (or even better, a propulsion). This applied? to gas flows (air) or to liquid flow (water). This of course, considering the due rotating directions as well as the inclination, wings, curvature and the due dimensioning for every application of every technical field.

                  ?With the appropriate power plant and the appropriate dimensioning and number of RPM this invention is also feasible to generate an atmospheric air propulsion and the autoprolpusion of an aircraft. Being an effective and very simple s

                  Full details Contact close
                • State of the Art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT - Atypical Motor Engine TypeState of the Art / Novel Rotary-Turbo-InFlow Tech...

                    GEARTURBINE PROJECT

                    Atypical InFlow Thermodynamic

                    Technology Proposal Submission

                    Novel Fueled Motor Engine Type


*State of the art Innovative concept Top system Higher efficient percent. 
Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.


YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

                    -This innovative concept consists of hull and core where are held all 8 bteps of the work-flow which make the concept functional. The core has several gears and turbines which are responsible for these 8 steps (5 of them are dedicated to the turbo stages). The first step is fuel compression, followed by 2 cold turbo levels. The fourth step is where the fuel starts burning – combustion stage, which creates thrust for the next, 5th step – thrust step, which provides power to the planetary gears and turbines and moves the system. This step is followed by two hot turbo steps and the circle is enclosed by the final 8th step – bigger turbine. All this motion in a retrodynamic circumstance effect, wich is plus higher RPM speed by self motion. The Reaction at front of the action.

                    *8-X/Y Thermodynamic CYCLE - Way Steps:

                    1)1-Compression / bigger

                    2)2-Turbo 1 cold

                    3)2-Turbo 2 cold

                    4)2-Combustion - circular motion flames / opposites

                    5)2-Thrust - single turbo & planetary gears / ying yang
6)2-Turbo 2 hot

                    7)2-Turbo 1 hot

                    8)1-Turbine / bigger


-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front to front; "Collision-Interaction Type" - inflow vs blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. The Reaction at front of the action. A very strong Novel torque power concept.


-Non waste parasitic looses for; friction, cooling, lubrication & combustion. 

                    -Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia positive tendency motion. Kinetic Rotating Mass.


-Combustion 2Two continue circular [Rockets] flames. [ying yang] opposite one to the other. – With 2TWO very long distance INFLOW [inside propulsion] CONDUITS. -4 TURBOS Rotary Total Thrust-Power Regeneration Power System. -Mechanical direct 2two [Small] Planetary Gears at polar position. -Like the Ying Yang Symbol/Concept. -Wide out the Rotor circumference were have much more lever [HIGH Torque] POWER THRUST. -No blade erosion by sand & very low heat target signature profile. -3 points of power thrust; 1-flow way, 2-gear, 3-turbine. *Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.

                    Full details Contact close