Please wait...

You selected inventions in category Nanotechnology

  • ODSTM-1 in-situ dyne surface tension wettability measurement at fast moving plastic films and foilsODSTM-1 in-situ dyne surface tension wettability...
      Preview
      Description

      Method and device for online tough less surface tension control ODSTM-1 in DE19543289 by which the fast moving substrate through the measuring gap. It is transmitted with a chromatic beam and spectral selected light source were two optical channels are displaced and polarized by 90 degree to each other. Both optical axles are precise and motor driven shift able in certain angles from 25 up to 65 degree. The spectral light photons, transmission, extinction, absorption grades are detectable by two optical CCD imagine vision devices, integrated into the sensor case on other side of the substrate.

      Material condition
      At high speed moving substrates means plastic foil, flexible, film, laminate, coating, bonding, labeling, co-extrusion, BOPP, LDPE, LLDPE, HDPE, MDPE, MAS, MOH, MEV, PET, FEP, PP, PE, PS, PO, EVA, PTFE, PVC, PTFE, Vinyl, Polyester, wrapping, self-adhesive tape, high strength, cross laminated, adhesive coated films, reflective or magnetic sheeting, automotive tape products, inkjet, heat sealing, security, pressure sensitive tapes for entertainment or building industry, masking or printable plastic films, polycarbonate, acrylic, extruded or polished cellulose, optical grade polycarbonate, sheets for IR or laser protection, filter sheet, imaging, capacitors, bi-oriented polystyrene sheet, multilayer co-extruded film, PVC, PETG, polyimide, tear tapes for aerospace, inner covering in aircrafts, automotive, medical, bioengineering, renewable, agriculture, marine, household, commercial, domestic, construction, high-porous membranes for uses in alkaline lithium ion batteries, fuel cells, filtration equipment. By gauges 10-500 microns, fabric widths up to 10000 mm and web speeds up to 18 m/s.

      Optical properties and quality control
      Material specific wavelength selection 1200 up to 1800 nm, material specific finger prints, molecular spectral properties, transmission, optical angle scanning, ultra low level stray scatter light detection, polarization, slot diaphragms, transverse displacements control the light beams along and far from the optical X and Y axes. The results are extreme scattering, diffraction, NIR, IR, stray light photons generation into the layer areas at both sides of the moving substrate.

      Their reflected and transmitted light intensities enables the determination by defined formulas and data matrixes the surface tension values in ranges from 28 up to 62 mN/m or dynes which are direct associate and bond to real static values for statistical quality control (SQC).

      And this entirely independent of the material specific influences as like surface consistency, thickness, density, weight, opacity, coherence, filling, stretching, shrinkage, structure, co-extrusion, polar grouping, temperature, intrinsic motivation or viscosity, hydrophobia, hydrophilic molecules, hydrogen, moisture, water steam proof, bi-layer, polymer, patterning, nanostructure, irradiation, isotopic, catalyst, coherence, absorption, photo mask effect, radiation, resonance bands, Raman, electron spectroscopy for chemical analysis ASTM or ATR method, property, acoustic photonic liquid effects, pre material treatment as corona, plasma jet, flam treatment.

      Full details Contact close
    • MLL-1 high speed laser beam steering for material treatmentMLL-1 high speed laser beam steering for material...
        Preview
        Description

        Ultra high scan speeds up to 4000 Hz or 240000 rpm with commercial air-bearing motors.
        REAL galvanometer scanner alternatives, precise laser beam deflection up to 4 Kilowatt Co2 by high dynamic performances.
        From 8 up to 15 mm laser beam aperture diameter, advantage beam quality factor M2 less then 0.9 for focus spots down to 60 micron.
        Product process advantages enable total different product indicators and milestones against other laser perforation or material treatment processes which allows significant product property, trademark indications, patent claims, unique company features in micro perforation of tipping, cigarette packaging or other paper or material.
        E.g. wide range of laser perforation groups as common active ventilation zone to obtain several advances in air stream distributions into cigarette filter, perfect perforation line guiding around cigarette filters or other food, domestic, industry products to assure constant porosity results.
        Several pattern or wave line design for different brands, number of holes or pattern with 10 or 20 per cm length are constant, porosity range from 100 up to 1000 C.U., holes sizes from 60 up to 120 micron, holes densities from 100000 up to 500000 holes per second in total.
        From 1 up 6 perforation pattern, lines, marks or scripts can combines a group, perforation hole, pattern quality or porosity remains in standard levels.

        Other web material, substrate or products are treatable in similar processes, existent laser perforation, treatment machines are able to modify with new optical, micro mechanical and control elements.
        Low investment and finance budget of technical modifications because exchanges of certain elements, complete devices are adaptable on existent off-line perforation machines or other laser treatment handling systems.

        Capability to adapt beam divert devices or units at on-line perforation system at cigarette making machines up 12000 cpm.

        The patent of devise, process and product properties are pending as DE102004012081.

        Outstanding product applications
        For web or sheet material, metal, isolation, foil, film, plastic, substrate, leather, textile and paper enables now large number of possibilities for micro hole position, different pattern, design, wave, zigzag, cryptograms, scripts, marking, scribing, scratching, tear off lines or others which generates. E.g. optimize air distribution characteristics into cigarette filters, unique anti counterfeit piracy indication and not countable product advantages.

        Special remark creates fundamentally new product properties, e.g. as final products for mouthpieces with tipping paper at cigarettes or other tobacco, packaging, security products, flip off or hinge-lid packs.

        Specific indication of brand names to recognizable for everyone and even for product buyers, if micro design, holes, patterns, holograms are to see with magnified views only.
        Or sensitive touch able as Braille scripts generated by micro cluster cryptograms or holograms.

        MLL-1 targets many existent and new applications with high speed scans of laser beam divert in horizontal or vertical position.
        Sophisticated ultra high speed spins optical divert elements allows low budget modifications at existent systems and production machines.
        Micro-Laser-Line technology means real alternative for high speed galvanometer scanner to archive micro cluster perforation, pattern design, waves, zigzag, packages line, cryptogram, company logo, hologram, anti counterfeit piracy contours for security paper, safety, bank notes, cards, metal sticker, printing, laminating, coating, fruit, food, bread, vegetable, agriculture covering, transparent films, plastic sheets, holographic paper, cigarette, tipping, filter, aluminum foil, shrink able film, tear tapes, label, cardboard, matrix, marking, scribing, automotive, pharmacy, smoking, chemical or medical products, electronics part, chips, indicators, writing contours or profiles, embossing or holographic.

        Full details Contact close
      • LPM-1 laser micro cluster perforation, material treatment, mass productsLPM-1 laser micro cluster perforation, material...
          Preview
          Description

          LPM-1 is patent granted by DE102004001327, operates with quadruple Co2 carbon or other laser beam inputs up to 4 Kilowatt to a high power twin vacuum level multiplexer to generate up to 200 individual laser output channels and perforation rows cross web, combines automatic positioned laser perforation heads, focus setting, web speeds up to 400 m/min, web widths up to 2000 mm, up to 2.5 Million holes per second, jumbo roll-by-roll production, optical inline permeability as perforation line position control, porosity feedback, hi-tech automation level and other features. Each laser micro perforation lines can achieve 100 up to 1000 C.U.

          Industry fields
          The conception of high power twin level laser beam multiplexer enables hundred options in other industry application fields as cutting, cut-off, welding, surface finishing, high speed drilling, ablation, cleaning, micromachining, polishing, forming, melting, surface treatment, roughness improvement. Each up to 200 single laser beams is coupled via flexible hollow fibers allows treatment processes or micro perforation heads easy to position in X across and in Y direction of running web or static placed sheet material. The automatic processes, equipments and devices open now outstanding possibilities in industry, metal, plastic, domestic, tobacco product, medical, hygienic, wall covering, security cards, bank notes or food application. LPM-1 means cluster material treatment at wide web, large area, surface or whole material treatment, high power dual rotation laser beam splitter, twin multiplexer level, Co2, YAG, EXCIMER, DIODE, SOLID STATE laser with multiple optical inputs, flexible hollow waveguide fibers, HCW, HWG up to 200 output channels. Material treatment with robot handling for stainless steel, ceramic, aluminum, wafer, glass, ceramic, brass, copper, wafer, silicon, plastic sheets, titanium, jewelry, silicon, solar, panel, photovoltaic, micromachining, slitting, rewinding, refining, hybrid laser cutting machines or stand along systems.

          Micro laser perforation technology
          Laser perforation in general, possible to perforate by pulsed or enlarged focused laser beams are holes sizes from 60 up to 200 microns at density of holes of typically 10-30 holes per cm, holes sequences 100000 up to 400000 holes per second at a maximal of 16 punctured laser rows cross web with traditional systems or machines.

          Means in cigarette, tipping, plug wrap, filter, flexible packaging, packs, tear tape, plastic and other material webs. With porosity levels from 100 up to 3000 C. U., normally in web widths from 100 up to 500 mm, in particular cases up to 1500 mm, at web speeds of up to 600 m/min, depending on porosity and material consistency in relation to its ability to perforate.

          Full details Contact close
        • ESP-1 medium frequency shift power switching converterESP-1 medium frequency shift power switching...
            Preview
            Description

            IPM develops a dual power, high voltage, medium frequency switching converter unit which works with hybrid drives, compact EMI, EMV, NEC, CE safe semiconductor power electronic stages, supporting capacitors and high voltage ferrite transformers to generate ultra short high voltage pulses and sparking burst groups. Advantages are based on uses of standard circuits with extended semiconductors for cluster, corona substrate treatment, ac/ac, ac/dc converter, drive units, frequency, upward or downward converter, power electronics supplies. Industry application of electrostatic perforation, converting, drives or others uses IGBT, MOSFET, HVFET semiconductor power stages.

            That circuits are working as converters with extremely short power pulses 0.05 up to 15 micro second, current peaks up to 300 Amps by du/dt of 2500 Volt per micro second on a serial connected inductivity and loading condenser where the secondary ferrite transformer coils supply sparking electrodes up to 50 Kilovolt as a permanent open loop and short circuit condition. A safety circuit logic and two hybrid drivers allows a alternately switching of semiconductor A and B which generating consequently higher operation frequencies and power levels meanwhile electrical and thermal conditions remains on each in the same range as in single switching status.

            Approximately double frequency and power level condition obtains higher switching efficiencies, more perforation power, higher corona treatment level, powerful drives, frequency converters etc. depends of industry applications.

            Semiconductors in high power, high current, high voltage circuits obtains in cluster perforation, surface treatment, modifications, corona, drives or other switching application frequencies up to 250 KHz, 1400 Volt, power levels up to 30 Kilowatt and more. Higher power efficiencies and lower switching losses are further advantages. The precise pulse timing by a certain time windows with constant or variable frequency generates with high voltages sparking holes sizes and sequences through the fast moving material webs. Repeat frequencies of the entire circuit can up to the double switching frequency of each semiconductor.

            As well for plasma jet control, heavy ion research, switching devices, power supplies, laser diode supplies, compact switching systems, frequency converter, emergency power supplies, ultra short mega peak current, ignition, sparking, arc, compressor, emergency, train, ship, vessel power supply, generator, fuel cell, upward, downward, stabilizer, soft starter, vector, phase, inverter, servo system, motion, stepping, spindle, CNC, machine, asynchronous, standard, motor, torque, automation, remote, hybrid, plug-in, car, battery, lithium, Ion, renewable, energy, wind, solar, panel, recycling, medical equipment, membrane filtration, robotic, photovoltaic, industrial automation. The patent is granted as DE10328937.

            Full details Contact close
          • MLL-1 anti-counterfeiting product design, marking, scribing, logo, brand IDMLL-1 anti-counterfeiting product design,...
              Preview
              Description

              Anti piracy counterfeiting design and cluster system
              The world wide new Micro Laser Line MLL-1 technology generates cluster pattern, micro holes, sinus, waves, zigzag, cryptograms, logos, holograms, brand names or other kind of perforation designs in web direction which can look like as a group of micro laser lines. Concerned tipping paper means non coaxial circumference at cigarette filters.

              As known offline laser perforation machines or processes generating strait holes lines in web direction of running cigarette tipping paper webs or other materials.

              New beam divert moving, scanning, flipping elements control each single laser perforation lines in cross material direction which are precise focused for micro holes in ranges from 50 up to 120 microns. All to uses for laser sources and types as Co2, YAG, EXCIMER, UV, FIBER, SOLID STATE or DIODE.

              Products, applications, advantages, high-holes-densities micro perforation, ventilation, mass product properties
              breathable, ventilation, filter cigarettes, tipping, packaging, plug wrap, refinish, thin paper, MYO, RYO, LIP
              booklet, bible, printing, magazine, promotion, flyers, newspaper, improved modified surface properties
              Kraft paper, sacks with low PE coating, single or triple layer multi wall sacks, tubers, bags for cement, plaster, maize, grain, pet food, granulate or powder
              gained air outlet during filling with high efficiency to keep packed products in specified barrier condition
              extending storages, live time or durability of certain goods and products
              decoration or gift paper with thin coating films
              PVC laminate, Vinyl, decoration, wall paper to eliminate condensation effects, enable gas exchanges, avoid rises of mildew or rottenness
              joint or corner Kraft paper tapes to avoid glue bubbles and enables material diffusion
              fleece bonding material, low plastic film layers for outdoor, under roof protection covering, wooden houses for oxygen exchanges
              technical textiles for oxygen or gas exchanges to avoid condensation processes
              breathable overalls, heavy duty, disposable work dresses, trousers, made of thin PE fleeces or others
              biotopes and prevention of water pollution
              leather or cloth inlets for comfortable non sweat wearing under wet, high humidity and tropical condition
              soap, deodorant, hygiene, beauty creams, baby care, other packaging products
              which needs smell suggestion for marketing indication and buying advantages
              vegetable, flowers or food with paper packaging replacements for oxygen or gas exchanges
              bread, rolls, fruit or food to improve freshness and aroma
              technical multi layer foils for industry, medical, bioengineering, filtration purposes surface modification, improved roughness
              micro filter, membranes, battery separation layers
              bio lab analytic, alcohol, liquid, blood filtration, clean room, agriculture, reduction or force growth rates

              Full details Contact close
            • Full Color 3D Solid Image ScannerFull Color 3D Solid Image Scanner
                Preview
                Description

                This novel invention uses polishing techniques to slowly polish or abrade away stepped layers of an object to be scanned. The scanned object is cast into a contrasting resin which provides a dark (or light) background for photography. The layers are digitally photographed stepwise to produce a record of internal structures. 2D digital images are reassembled using computer and software methods to produce exquisitely fine detailed 3D digital models of the solid internal structures in full color.

                Because polishing can be controlled tightly, layers may be removed in the in the nanometer realm. This implies the limiting barrier in resolution is the pixel size of the recording camera. These cameras pixels are getting denser and denser as technology progresses which only improves the performance of the 3D scanner.

                The multi-spectral light used to illuminate the image plane can be used to identify the chemical components of the object. Therefore the 3D scanner has a spectrometer function as well.

                The Full Color 3D Solid Image Scanner would be important in the semiconductor industry. Most importantly 1st article scanning semiconductor devices to determine as manufactured state vs. as designed.

                Full details Contact close
              • A Modular Screwless Furniture Assembly Indian Patent No 226078A Modular Screwless Furniture Assembly Indian...
                  Preview
                  Description

                  OUR CONCEPT IS UNIQUE , IT IS MULTIPURPOSE, IT CAN BE USED IN TILING FORM AND INSERTING ALSO, IT CAN BE USED FOR WALL PANELING, FULL HEIGHT PARTITIONS,THE RANGES OF PRODUCT AVAILABLE IN THE MARKET ARE MUCH INFERIOR TO THE PRODUCT INVENTED BY US AND ARE ALSO TOO COSTLY THOUGH OUR ENTIRE FRAME WORK (SKELETON) IS OF ALUMINIUM. WE CAN OFFER OUR PRODUCT IN THE OPEN MARKET AT MUCH LESSER PRICE THEN THE PRESENT RATES PREVAILING IN THE MARKET AND IN THAT EVENT STILL WE CAN HAVE THE HANDSOME PROFITS. THIS MODULAR SCREW LESS FURNITURE ASSEMBLY CAN BE DISMENTLED AT ANY POINT OF TIME WITH OUT CHANGING ITS QUALITY, LOOK AND CAN BE TRANSPORTED AT ANY OTHER PLACE RE-ERRECTION AND RE-USE, AND THIS CAN BE DONE ANY NUMBER OF TIME, A SYSTEM WHICH MANIPULATE YOUR CREATIVE MIND.


                  contact no:

                  9820854298 / 62.
                  himmat /mahendra.
                  works: 6416 5456
                  fax: 2896 3703

                  email id:
                  uniquekreation_kmm@yahoo.co.in

                  web:
                  www.uniquekreationindia.com


                  for ready reference you can also visit on

                  http://www.officemodularfurnitures.com/
                  www.kmmistry.com

                  Full details Contact close