You selected inventions in category Physics

• High speed bicycle
  Preview

  Description

  "New Invention for a Bicycle".
  
  This kind of new invention for a bicycle have two(2) special pedals; the lever style and strong compared to the normal style pedal .
  
  Normally, the bicycle pedal arm works only 90 degree/360 degree in one time pedalling.
  but this new invention pedal arm works 180 degree/360 degree in one time pedalling.
  
  
  And, the lever pedal have a double power than the normal pedal power.This bicycle is has also semi recumbent style.

  Full details Contact close
• ODSTM-1 in-situ dyne surface tension wettability...
  Preview

  Description

  Method and device for online tough less surface tension control ODSTM-1 in DE19543289 by which the fast moving substrate through the measuring gap. It’s transmitted with a chromatic beam and spectral selected light source were two optical channels are displaced and polarized by 90 degree to each other. Both optical axles are precise and motor driven shift able in certain angles from 25-65 degree. The spectral light photons, transmission, extinction, absorption grades are detectable by two optical CCD imagine vision devices, integrated into the sensor case on other side of the substrate.
  
  Material condition
  At high speed moving substrates means plastic foil, flexible, film, laminate, coating, bonding, labeling, co-extrusion, BOPP, LDPE, LLDPE, HDPE, MDPE, MAS, MOH, MEV, PET, FEP, PP, PE, PS, PO, EVA, PTFE, PVC, PTFE, Vinyl, Polyester, wrapping, self-adhesive tape, high strength, cross laminated, adhesive coated films, reflective or magnetic sheeting, automotive tape products, inkjet, heat sealing, security, pressure sensitive tapes for entertainment or building industry, masking or printable plastic films, polycarbonate, acrylic, extruded or polished cellulose, optical grade polycarbonate, sheets for IR or laser protection, filter sheet, imaging, capacitors, bi-oriented polystyrene sheet, multilayer co-extruded film, PVC, PETG, polyimide, tear tapes for aerospace, inner covering in aircrafts, automotive, medical, bioengineering, renewable, agriculture, marine, household, commercial, domestic, construction, high-porous membranes for uses in alkaline lithium ion batteries, fuel cells, filtration equipment. By gauges 10-500 microns, fabric widths up to 10,000mm and web speeds up to 18 m/s.
  
  Optical properties and quality control
  Material specific wavelength selection 1,200-1,800nm, material specific finger prints, molecular spectral properties, transmission, optical angle scanning, ultra low level stray scatter light detection, polarization, slot diaphragms, transverse displacements control the light beams along and far from the optical X and Y axes. The results are extreme scattering, diffraction, NIR, IR, stray light photons generation into the layer areas at both sides of the moving substrate. Their reflected and transmitted light intensities enables the determination by defined formulas and data matrixes the surface tension values in ranges from 28-62mN/m or dynes which are direct associate and bond to real static values for statistical quality control (SQC). And this entirely independent of the material specific influences as like surface consistency, thickness, density, weight, opacity, coherence, filling, stretching, shrinkage, structure, co-extrusion, polar grouping, temperature, intrinsic motivation or viscosity, hydrophobia, hydrophilic molecules, hydrogen, moisture, water steam proof, bi-layer, polymer, patterning, nanostructure, irradiation, isotopic, catalyst, coherence, absorption, photo mask effect, radiation, resonance bands, Raman, electron spectroscopy for chemical analysis ASTM or ATR method, property, acoustic photonic liquid effects, pre material treatment as corona, plasma jet, flam treatment.

  Full details Contact close
• MLL-1 anti counterfeiting piracy product design,...
  Preview

  Description

  Anti piracy counterfeiting design and cluster system
  The world wide new Micro Laser Line MLL-1 technology generates cluster pattern, micro holes, sinus, waves, zigzag, cryptograms, logos, holograms, brand names or other kind of perforation designs in web direction which can look like as a group of micro laser lines. Concerned tipping paper means non coaxial circumference at cigarette filters.
  
  As known offline laser perforation machines or processes generating strait holes lines in web direction of running cigarette tipping paper webs or other materials.
  
  New beam divert moving, scanning, flipping elements control each single laser perforation lines in cross material direction which are precise focused for micro holes in ranges from 50-120 microns. All to uses for laser sources and types as Co2, YAG, EXCIMER, UV, FIBER, SOLID STATE or DIODE.
  
  Products, outstanding applications, advantages with micro perforation
  breathable and ventilated mass products as cigarette, tipping, filter, flexible packaging, plug wrap, refinish or fine paper
  booklet, bible, printing, magazine, promotion, flyers or newspaper with improved or modified surface property
  decoration or gift paper with thin coating films
  PVC laminate, Vinyl, decoration or wall paper to eliminate one side condensation effects
  enable control gas exchanges, avoid rises of mildew or rottenness
  joint or corner Kraft paper tapes to avoid glue bubbles and enables material diffusion
  fleece bonded with thin plastic film layers for outdoor, under roof protection or covering, wooden houses to enable gas exchanges
  technical textiles for gas exchanges to avoid condensation processes
  breathable overalls, heavy duty or disposable work dresses, trousers, aprons, jackets or shoes made of thin PE fleeces or others
  thin PP or PE contacted Kraft paper bag, cement sacks, plaster, maize, grain, pet food, granulate or powder for gained air outlet or out blowing during filling processes with multiple time reduced efficiency
  keep packed products in same barrier condition as without micro perforation
  extending storage, live time or durability of certain goods and products
  biotopes and prevention of water pollution
  synthetic, real leather or cloth inlets for comfortable non sweat wearing under wet, high humidity and tropical condition
  soap, deodorant, hygiene, beauty creams, baby care or other packaging products which needs smell suggestion for marketing indication and buying advantages
  food, vegetable or flowers with paper packaging replacements for gas and oxygen exchanges
  bread, rolls, fruits or food to improves for freshness and aroma advantages
  technical multi layer foils for industry, medical, bioengineering or filtration purposes, surface modification or improve the roughness
  micro filter, membranes, battery separation layers, bio or lab analytic
  alcohol, liquid or blood filtration, clean room, agriculture plant applications
  reduction or force growth rates of bio processes

  Full details Contact close
• LPM-1 laser cluster micro perforation, material...
  Preview

  Description

  LPM-1 is patent granted by DE102004001327, operates with quadruple Co2 carbon or other laser beam inputs up to 4 Kilowatt to a high power twin vacuum level multiplexer to generate up to 200 individual laser output channels and perforation rows cross web, combines automatic positioned laser perforation heads, focus setting, web speeds up to 400 m/min, web widths up to 2,000mm, up to 2,500,000 holes per second, jumbo roll-by-roll production, optical inline permeability as perforation line position control, porosity feedback, hi-tech automation level and other features. Each laser micro perforation lines can achieve 100-1,000 C.U.
  
  Industry fields
  The conception of high power twin level laser beam multiplexer enables hundred options in other industry application fields as cutting, cut-off, welding, surface finishing, high-speed drilling, ablation, cleaning, micromachining, polishing, forming, melting, surface treatment, roughness improvement. Each up to 200 single laser beams is coupled via flexible hollow fibers allows treatment processes or micro perforation heads easy to position in X across and in Y direction of running web or static placed sheet material. The automatic processes, equipments and devices open now outstanding possibilities in industry, metal, plastic, domestic, tobacco product, medical, hygienic, wall covering, security cards, bank notes or food application. LPM-1 means cluster material treatment at wide web, large area, surface or whole material treatment, high power dual rotation laser beam splitter, twin multiplexer level, Co2, YAG, EXCIMER, DIODE, SOLID STATE laser with multiple optical inputs, flexible hollow waveguide fibers, HCW, HWG up to 200 output channels. Material treatment with robot handling for stainless steel, ceramic, aluminum, wafer, glass, ceramic, brass, copper, wafer, silicon, plastic sheets, titanium, jewelry, silicon, solar, panel, photovoltaic, micromachining, slitting, rewinding, refining, hybrid laser cutting machines or stand along systems.
  
  Micro laser perforation technology
  Laser perforation in general, possible to perforate by pulsed or enlarged focused laser beams are holes sizes from 60-200 microns at density of holes of typically 10-30 holes per cm, holes sequences 100,000-400,000 holes per second at a maximal of 16 punctured laser rows cross web with traditional systems or machines. Means in cigarette, tipping, plug wrap, filter, flexible packaging, packs, tear tape, plastic and other material webs. With porosity levels from 100-3,000 C. U., normally in web widths from 100-500 mm, in particular cases up to 1,500mm, at web speeds of up to 600 m/min, depending on porosity and material consistency in relation to its ability to perforate.

  Full details Contact close