Please wait...

You selected inventions in category Telecommunications

  • GSM3G4GWi-Fi High Power Jammer model CPJX620 Total Output Power 15-20WGSM3G4GWi-Fi High Power Jammer model CPJX620...
      Preview
      Description

      this model is upgraded version based on CPJ3040,it is stationary signal blocker,it is with six antennas, its output power is about 24W, its blocking radius range is about 50-80M. After installing antennas, Turn on the switch, it could be use and it is very easy for operating. its weight is 5kg. Of course, its blocking range is twice as much as CPJ3040.

      Additional Special Features
      Higher output power total Max24w
      Good cooling system with cooling fan inside
      Work non-stopped
      Longer and stronger antennas
      Technical Specifications
      Total output power: Up to 24W
      Power supply: AC-100-240V to DC-5V adapter
      Modules Per Unit:6
      Antennas:6Omni directional antennas SMA-Type Connector
      Jamming frequency range:
      GSM900 925-960 MHz - 6W
      GSM1800 1805-1880 MHz -4W
      3G2100 2110-2170 MHz - 4W
      4G2600 2570-2690 MHz- 2W
      Wi-Fi/Bluetooth 2400-2483 MHz - 2W
      4G700 790-862 MHz - 6W
      Bands can be configured per demand
      Dimension:365 x 155x 51mm
      Weight: 5kg
      Operating Temp:-20ºC - +70ºC
      Humidity: 5% - 95%
      *Specifications are subject to change without prior notice
      Application Type:
      meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus , hospitals, gas stations etc.

      Full details Contact close
    • GPS Vehicle Tracker OCT600GPS Vehicle Tracker OCT600
        Preview
        Description

        OCT600 is a GPS tracking device that utilizes the latest GPS, and Cellular technologies to provide the location, direction, speed and history of your vehicle. You can track your devices and manage your account via the website.
        Main feature:
        Tracking via SMS or GPRS (TCP/UDP)
        Living location report
        Tracking by time interval/distance
        Geo-fencing control and alarm
        Get detail address via SMS directly
        External power cut alert
        GOOGLE MAP link for location via SMS, Call
        Remote engine/fuel cut
        ACC Detection
        SOS panic button, emergency alarm.
        Mileage calculation report
        Car door on/off status detecting (option)
        Voice monitoring (option)
        2 way communication (option)
        Firmware update OTA (option)
        Fuel monitoring (option)
        Camera to take picture(option)
        1.Fun photo snap for you and your family in vehicle anytime without phone.
        2.Photos taken automatically once vehicle over speeding, good for fleet manager on staff Performance Evaluation.
        3.Vehicle security, take photos of thief or robber automatically if something bad happened.
        4.Various methods for getting photos, SD card, mobile MMS and APP, tracking centre.
        Driver identify(option):
        A: Driver has to swipe ic card before driving the car.
        B: Driver information and daily working report can be checked via tracking centre.
        GPS tracking service
        OCT600 works with online tracking system ( http://onergps.com login: Oner, password: 123).
        In this system, user can control all the vehicles in real time, include real time tracking, history play
        Back, route setting, driver management, POI, details reports, alarm setting, etc.
        specification
        Power supply +6V - +35V / 1.5A
        Backup Battery 60mm x 80mm x 30mm
        Weight 145g
        Operating temperature -20° to 55° C
        Humidity 5% to 95% (Non-condensing)
        Frequency GSM 850/900/1800/1900Mhz
        GPS Chipset latest GPS SIRF-Star III chipset
        GPS Sensitivity -159Db
        GPS Frequency L1, 1575.42 MHz
        C/A Code 1.023 MHz chip rate
        Channels 20 channel all-in-view tracking
        Position Accuracy 10 m, 2D RMS
        Velocity Accuracy 0.1 m/s
        Time Accuracy 1 us synchronized to GPS time
        Default datum WGS-84
        Reacquisition 0.1 sec., average
        Hot start

        Full details Contact close
      • Oner Mini GPS Vehicle tracker OCT800-DOner Mini GPS Vehicle tracker OCT800-D
          Preview
          Description

          OCT800 is the newest Mini Waterproof GPS tracking device, with 4 I/O port , support to customize any feature as you want, uses the imported GPS chips and GSM module, support more function extensions like Fuel Monitoring, Voice Monotoring, Speed Limitation and etc.
          This device is highly recommended to use in fleet and logistic, security, car rental company and so on.

          Functions


          Tracking via SMS or GPRS (TCP/UDP)
          Living location report
          Tracking by time interval / distance
          Geo-fencing contrct106ol and alarm
          Speeding alert
          Get detail address via SMS directly
          External power cut alert
          GOOGLE MAP link for location via SMS & Call
          Remote engine / fuel cut
          ACC detection
          SOS panic button, emergency alarm
          Mileage calculation report
          Firmware updating OTA
          LBS Tracking mode
          External power status detecting
          Power saving mode (option)
          Fuel monitoring (option)


          Specifications


          Power supply +6V - +35V / 1.5A
          Backup Battery 76mm x 50mm x 24mm
          Weight 76g
          Operating temperature -20° to 55° C
          Humidity 5% to 95% (Non-condensing)
          Frequency GSM 850/900/1800/1900Mhz
          GPS Chipset latest GPS SIRF-Star III chipset
          GPS Sensitivity -159Db
          GPS Frequency L1, 1575.42 MHz
          C/A Code 1.023 MHz chip rate
          Channels 20 channels all-in-view tracking
          Position Accuracy 10 m, 2D RMS
          Velocity Accuracy 0.1 m/s
          Time Accuracy 1 us synchronized to GPS time
          Default datum WGS-84
          Reacquisition 0.1 sec., average
          Hot start

          Full details Contact close
        • 3D-Phone Increaser  - Turn your Smartphone into a 3D Monitor - for all VIDEOS, FOTOS and GAMES !3D-Phone Increaser - Turn your Smartphone into a...
            Preview
            Description

            Yes, it's possible! Turn your smartphone into a 3D monitor.

            Handling is easy open the 3D-Phone Increaser, insert smartphone and adjust focus. PRESS PLAY that was about everything, you sit back and enjoy fantastic 3D experience wherever you want it.

            Simple technology and a fantastic result. On the annoying 3D glasses can be dispensed through the 3D Phone Increaser. The results are also better than of other current 3D techniques. The picture has more depth, is sharper and there are no overlapping distorted images. In addition, no special software or format is needed, the technique works for any video, image or game.

            Full details Contact close
          • IF SELF-COMPENSATED ELECTRONIC ACTIVE FILTERSIF SELF-COMPENSATED ELECTRONIC ACTIVE FILTERS
              Preview
              Description

              IF FULLY SELF-COMPENSATED ACTIVE FILTER (The Ultimate Analog Filtering Tech)

              This invention relates to 2° order, 3 base-stages biquad/universal continuous time (CT) analog active filters type resonant and, more particulary, noiseless active full self-compensation techniques to improve the frequency range, the stability and/or the selectivity of the filters themselves with a very low or as if zero cost, overcoming said problems.
              These active filters techniques are revolutionary, because they are the only ones in the world that (fully) extend the limited bandwidth of the operational amplifiers employed using, with new direct connections, a single resistor or an additional operational amplifier that has a functionally filtering output, and without destabilizing the filter itself.
              Applications: LF (low frequency) to IF (intermediate frequency), particulary in systems for telecommunications and just for example, as the photo of prototype shows, in a remote reception stage system, where high filtering performances are required to receive and amplifing the signal of interest only, to carry out the right transmitted information to be decoded, without using several filter stages and having system destabilization.

              ADVANTAGES:
              -Very easy to manufacture, no special components or procedures are required;
              -They are the most stable (no manual compensation is needed), and the less noisy* CT single-ended analog active filters (*noise is the interference signals and the lower it is, the higher is the device fidelity);
              -They are inexpensive and require less space, this means:
              -A lower manufacturing cost than the other compensated filters;
              -Saving power consumption and integrated chip area making more versatile, reliable the circuit(s) and longer its life. Ideal for devices that have to work in space or for long time without any human intervention, in critical enviromental conditions also.

              APPLICATIONS: These type of filters may also be adopted in many electronics products which people use every day, improving considerably their performances, within: Telecommunications, radio systems (IF down-conversion input stage or input unit of a superheterodyne receiving system), walkie talkies, analog/mixed-signal systems, equalizers, SOC (systems on chip), measurement electronic instruments (such as oscilloscopes) and the like.

              EXPERIMENTAL TEST: These filters have been carefully studied, go-between thousands of behaviour analysis done by computer using the P.S.P.I.C.E. simulator software, and testing dozen of prototypes.
              Several types of analog CT active filters are available today, someone recently patented by great companies too using low noise balanced operational amplifiers also, but they can’t make use of the “Total Parasitic Voltage Control System” (TPVCS). So, mine is the best product in its category for all the above mentioned reasons.

              MARKET PERSPECTIVES: This product type has good market into U.S.A., Canada, Europe and China.

              Full details Contact close
            • VIRTUAL CURRENCY SYSTEMVIRTUAL CURRENCY SYSTEM
                Preview
                Description

                This system Will eleminate physical currency notes and everybody will be able to use (even an illiterate person who only recognises currency notes). All the transactions will be recorded and can be topped up via ATM of the banks so the agents for top up of money will not be required.The system will be more robust as it requires password along with the users fingerprint.No need to enter any data by typing.

                Full details Contact close
              • Seal SECURITY and TRACEABILITY  RFID-  Patent EEUU US595629A   BRASIL  PI 9900236-1A   Argentina AR013808B1  Pat Pend P060101167Seal SECURITY and TRACEABILITY RFID- Patent...
                  Preview
                  Description

                  STEC owns Patents 5.915.629(USA), AR013808B1 (Argentina), PI9900236-1A (Brazil), Pat. AR052712B1 (26/06/2012)

                  This technology solution addresses two critical requirements in the processing of packages, luggage, cargo, parcels, containers and other goods in transit
                  Identify each package or container in a secure, simple and economical manner.
                  Secure the contents of each package or container in order to avoid unauthorized access to its contents

                  Current solutions: Separate solutions for both requirements have been available for a long time. Tags, stickers, bar codes, and even radio-frequency (RF) tags are used to identify goods in transit. Moreover, an ample variety of seals, tapes, shrinkable coatings, etc., are employed in an attempt to prevent the contents from being accessed.

                  For example, many cargo containers have non-removable
                  RF tags. This has become an established technology for identification and tracking of containerized cargo in transportation terminals. However, these tags do not
                  secure the contents of the container.


                  STEC seals provide a security fastening connection for use in diverse cargo, baggage, parcels, packaging environments to replace the current conventional means such as ropes, tapes etc, with an friendly installation mechanism without special tools requirements.
                  Regarding the identification means, a number of technologies may be used with STEC technology including:
                  Bar Codes
                  Radio-Frequency Identification tags (RFID+GPS)
                  Infra-red (IR) tags


                  Environment: For most applications of Radio-Frequency Identification (RFID) Technology has several advantages. Moreover, if necessary several identification means may be simultaneously used on the same package (for instance, Bar Codes and RFID).
                  The implementation of this new technology requires the deployment of specialized infrastructure and software at each transportation terminal (airports, railway stations, etc.).
                  This includes identification terminals where packages are identified and secured, tag readers at the specified control points and a centralized information-processing centre. It must be remarked that modern transportation terminals have data networking infrastructure already installed (“intelligent building” concept) thus minimizing the requirements of modifications of existing buildings.
                  STEC adapts very well for its use jointly with X-ray scanners, provides easy and secure identification of the scanned items, and prevents any tampering with their contents.

                  STEC active seal:The active seal has the capability to interact with RF-ID devices such as STEC passive seals or standard RF-ID tags. It can also communicate with a Remote Control Unit
                  The device is fastened to an object in transit, a vehicle, a container, etc., in the same way as a passive seal. Can monitor and log the status of neighbouring STEC seals or other RF-ID elements and environmental conditions. The information may be relayed on demand.
                  STEC active seals contain a microprocessor, batteries, an RF-ID reader, a communications link and may even include sensors for environmental parameters.

                  Full details Contact close
                • EXTERNAL ELECTROMOTIVE DRIVE UNIT FOR MOTOR VEHICLESEXTERNAL ELECTROMOTIVE DRIVE UNIT FOR MOTOR...
                    Preview
                    Description

                    EXTERNAL ELECTROMOTIVE DRIVE UNIT FOR MOTOR VEHICLES

                    So far we have been familiar with different solutions of vehicles that have classic drive unit by fossil fuels, hybrid vehicles and purely electric vehicles.
                    Our product is an electric vehicle, which connects to powered vehicle and by its motor power starts composition made of these two types of vehicles.
                    To a classic vehicle, it provides abilities such as

                    1) drive unit on electricity
                    Significantly lower electrical energy price comparing the price of fossil fuels even up to 75%. This price is even lower if the consumer has its own electrical energy producer

                    2) Carbon monoxide emission amounts 0%, the vehicle does not produce neither exhaust gases nor any other detrimental products.

                    3) Level of noise is lower per 90% comparing vehicles with classic drive units.

                    4) Vibrations made due to engine operations are also lower as comparing the piston engine it works with less motion of movable parts and less friction.

                    5) Energy utilization of energy consumed is up to 90%. Energy consumed that motor converts into mechanical energy has high degree of utilization comparing the engine with internal combustion, which high percentage of energy made by derivatives combustion – thermal expansive energy, releases without the possibility to use it and that energy efficiency level in fossil fuel vehicles is maximum up to 35%.

                    6) Vehicle has two driving axles that can work at the same time or by turning on only one of them at the time getting this way characteristic of vehicle for off-road driving.

                    7) Vehicle can easily be connected with mechanical connection with other types of vehicles such as semi-trailer achieving its compatibility - same drive unit for different means of transportation.

                    8) Vehicle provides higher vitality in traffic to a consumer as it has two separate drive units.

                    9) Vehicle provides additional trunk solving the problem of lack of conveying space in case of vehicles with small trunks.

                    10) Greater maneuverability of vehicle when having difficulty with parking and traffic jams, as the wheels are steered by direction

                    11) Better distribution of masses as external electromotive drive unit gives the role of stabilizer by its mass and prevents skidding by direction in case of sharp maneuvers.

                    12) Greater passive security of passengers in case of blow from the backside of vehicle, as in this case electromotive drive unit has the role of amortization area, which will receive greater part of blow energy.

                    13) Vehicle has the ability to produce electric energy and supply external consumers when it is in parking position.

                    14) Additional self-charging of batteries by solar photovoltaic cells when it is in parking position that can be blinds like pulled out and cover the roof of the trunk of motor vehicle and upper surface of powered vehicle, making batteries self-charging and giving the vehicle protection from strong sun or other atmosphere changes that can damage the car.

                    15) Three working modes:

                     Electro mod when the vehicle is moved by power of electromotor, which is supplied by electric energy from battery cells.

                     Hybrid mod, when electromotor of motor vehicle and motor of powered vehicle work together, vehicle in this situation has sum of power of these two motors, and also in this mod self-charging of batteries of motor vehicle over the electricity generator is realized.


                     Mod when powered vehicle starts its own engine on fossil fuels and the engine of motor vehicle is not active; this the situation battery cells are also self-charging by electricity generator, which is placed in the last vehicle on the picture.

                    16) Easy access to the components of vehicle in case of service or repair.

                    17) The possibility for vehicle theft is difficult as beside the regular barriers against theft it is necessary to decode control interface from the back motor vehicle.

                    Full details Contact close