Please wait...

You selected inventions in category Tools

  • Casing ScraperCasing Scraper
      Preview
      Description

      Description:The Casing Scraper is ideal for the removal of mud, cement, bullets, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing.
      Maintaining a clean casing I.D. is important when operating drilling, fishing, or wire line tools. Likewise, packers, patches, spears, and similar tools require clean surfaces to grip. Obstructions on casing walls will frequently cause these tools to fail or become difficult to operate.
      Construction:
      Utilizing a simple one-piece mandrel design, the Bowen Casing Scraper is constructed to be rugged, yet simple to operate and maintain. The Scraper conditions 50 percent more surface area than any other tool on the market. The full circle blades are so spaced to contact 600° (almost two complete circles) of casing surface at once.
      Short and compact, the Scraper also incorporates a long taper on the blades for passing through joints without hanging. The Scraper works in vertical or rotary operations and may be run on drill pipe or wire line.
      Bowen Casing Scrapers are available to condition pipe ranging from 2-3/8-inch tubing to 13-3/8-inch casing. For more information on the use, operation and specifications of the Scraper contact your National Oilwell representative.
      Features:
      Approximately 50 percent more scraping surface than any other scraper on the market which extends blade life.
      Full circle blades contact 600° surface at once.
      Short, compact, easy to assemble and disassemble.
      Longer guide taper on blades for passing through joints without hanging.
      Vertical and rotary operation may be run on wire line or drill pipe.
      Investment cast tool steel blades allows maximum scraping ability.

      Full details Contact close
    • The DuplicatorThe Duplicator
        Preview
        Description

        This gadjet copies images, pictures, grafiks and patterns of any kind on to a piece of paper, wood, or actually any surface for that matter.
        You just place the source on one side, the target on the other, you then, well let me say work the duplicator, then walla a few minutes later you have the ducplicate on B which is the target material. Nomatter how complex the source image is. It is very handy for, anyone who needs a quick copy of anything while not having a computer with printer, or formemost for artists, painters and airbrushers, even kids who need to spontaneously transfer an image onto a surface like paper, wood, metal sheet, or any surface without any transfer steps that wold be usually required like, plotting it on sticky paper first and printing it out etc..
        This gadjet comes in two different types. This one makes a copy and the second one makes a mirrored copy which means the opposite.
        In other words either you want to copy the source 1 to 1, or you need the exact copy but the other way round maybe, for instance for a bike tank or anything which needs two opposite but same patterns or grafiks etc.. both can be handled.
        Please note that we are talking a about a piece of analogue equipment that can be folded and stashed away for transport and weighs no more than a kilo.
        No computer required, no printer or plotter required, the pattern is already there where you wanted it without any further ado with transfer foil or sticky masking and so forth. It makes artists out of anyone who sees something they wanted to copy, bearing in mind of course that its a copy and not the original which was made by a real artist, we should respect that. :-)
        More info to come, dont want to give away too much though before the patent is through.
        Bye Ali Abbas /alias Alan-Lee (Please check out my other inventions too)

        Full details Contact close
      • Bending Door Water Proof WallBending Door Water Proof Wall
          Preview
          Description

          Rubber pads on back of panel to lean on windows or doors entirely covered by thin spongy plastic. Precise measurements of sides. Standing withinthe doorway or window, slightly bend the "panel" (towards yourself) til corners/sides of doors/windows and fit in by pulling the "panel" (unbending), squeezed in place. Rubber pads may be placed, easily and quickly, whenever needed.

          Full details Contact close
        • Bug RemoverBug Remover
            Preview
            Description

            A small exit "door" opens when "trigger" is pulled, releasing liquid (expanding in sponge). To pass in all sides and corners of home or apartment.

            Full details Contact close
          • SUFFI JET TRAYSSUFFI JET TRAYS
              Preview
              Description

              SUFFI JET TRAY TO SERVE FOOD ON PLANES: AN INNOVATIVE AND HIGH-TECH PRODUCT.

              We are Tecno Sky Studio - Food Service Innovation Engineering, a well-established company based in Trieste, leader in the field of inventions and patents.

              We are glad to give You the first-ever preview of our innovative patent “Suffi JET” (INTERNATIONAL PATENT PENDING), the perfect tray to serve food on your planes comfortably and neatly.

              Many technical innovations have made planes safer, technologically more advanced and more comfortable.

              Nevertheless the trays used on board to serve food and drinks are still not very functional and indeed quite old-fashioned in design.

              The data obtained from a painstaking survey and years of researches we carried on with the cooperation of international airlines proved that 90% of passengers find it difficult to eat on planes because of the unstable food trays, bottles, cups and cutlery.

              Similar surveys asked flight attendant to give their opinion about the functionality of trays in handing/collecting meals. They all agreed on the necessity of a better way to serve food.

              Considering all the data collected, we realized a list of the most common defects of traditional trays and prepared a report on the advantages of our innovative Suffi JET trays.

              We currently have a working prototype: all the surfaces are treated by a special LOTUS EFFECT paint (please see the attached files). We have found a new economical method for adding an antimicrobial treatment to with a silver infused coating. This approach ensures that the silver is localized on the tray surface where bacteria would grow – rather than encapsulated in the center of the tray where it is not useful. Spray coating is probably the easiest and most economical method.

              With this method it is possible to wash the tray at a very low temperature (cold water without detergents), so it is a big saving of energy.

              Please take note that our innovative tray could be useful also for hospitals where the hygiene is very important.

              Should You be interested in our products and should You need further information about our Suffi JET Trays, please do not hesitate to contact us!

              Full details Contact close
            • Hex Key Drill BitHex Key Drill Bit
                Preview
                Description

                Replaces the hand crank allen wrench or hex key with a bit that is inserted into a power drill for faster tightening. A set can be created to allow for various sizes and you can add a small drill to make it sell faster to women.

                Full details Contact close
              • multiple paperclipmultiple paperclip
                  Preview
                  Description

                  paperclip with one more bent to hold thick paper stack together, several possibilties, I have a drawing for two different paper clips in my invention, it is for Germany and I need some one who is interested in this idea very quick in the next three weeks

                  Full details Contact close
                • A DEVICE AND METHOD FOR ALTERING THE SHAPE OF STRING CABLE CORD OR  SIMILAR MATERIALA DEVICE AND METHOD FOR ALTERING THE SHAPE OF...
                    Preview
                    Description

                    Headphones have become ubiquitous within the modern world; and for good reason, people love their music. Understandably, people hate when something comes between them and their music. Unfortunately, headphones often become a vexing obstacle between the user and their music. Anybody who uses headphones will tell you that one of the most aggravating situations is when their all set to listen to their music, they get their media device out only to find the cables in a tangled mess.
                    Although untangling the headphones only takes a few minutes this is an inconvenience the user would rather not deal with. Enthusiasts and headphone producers have long recognized the problems associated with tangled cables, spending millions of dollars in research and development. Unfortunately, the result of this research has created subpar products that are either too inconvenient to use or are ineffective at improving the users experience. It has been proven many times that users are unhappy with the current headphones design and their poor tangle resistance. Moreover, there is a proven market for solutions. For example, one of many market proven products includes the Kickstarter Project CordCruncher, the project raised over $66,000 in just 30 days (http://www.kickstarter.com/projects/1587181400/cordcruncher-earbud-headphones). There are many other Kickstarter Projects that have raised over $600,000 for cable solutions.
                    Our solution has the same functionality as the Cord Cruncher Headphones, and more. The product would be cheaper, more versatile, and convenient to use; solving the annoying problems associated with tangled, damaged, strained, or knotted headphone cables while opening up possibilities for more creative uses of headphones. The solutions functions by using a special wire integrated into the headphone cable, the wire is commonly known as memory metal and has riveting properties. The memory metal allows the user to use the headphones, as they normally would, however in order to conveniently wrap the cables up for storage the user may press a button that causes the memory metal to return to a predefined shape. Useful predefined shapes may be a tidy coil, compact winding that contours to an electronic device, or even an Apple Logo! The possible shapes, sizes, and configurations are endless; any shape that cables can be wound into can be achieved automatically by using integrated memory metal. Custom designs may include the user name, a word, or customer design.

                    Full details Contact close